Difference between revisions of "Droop travel"
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
==Measure== | ==Measure== | ||
| + | [[Image:Car_diagram.jpg]] | ||
| + | |||
*Park the car on a flat, level surface and measure the rear [[ride height]]. | *Park the car on a flat, level surface and measure the rear [[ride height]]. | ||
*Slowely jack the car up until the weight starts to come off the rear wheel. | *Slowely jack the car up until the weight starts to come off the rear wheel. | ||
Revision as of 12:32, 9 August 2006
The distance a shock travels between loaded and unloaded.
File:Http://upload.wikimedia.org/wikipedia/en/e/ed/Car diagram.jpg
File:Http://wiki.seloc.org/index.php/Droop travel
Measure
- Park the car on a flat, level surface and measure the rear ride height.
- Slowely jack the car up until the weight starts to come off the rear wheel.
- Stop jacking and measure the ride height
- Subtract the static ride height to get your droop travel.
Nitron recommend ~35mm of rear droop travel but some people use more like 50mm.
Front droop is ...