Difference between revisions of "Replace the coolant"
Jump to navigation
Jump to search
(Add image.) |
|||
| (4 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| + | [[Image:S1DriversWheelarch.jpg|thumb|right|Drivers side wheelarch on an S1 with the liner removed]] | ||
To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill. | To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill. | ||
| − | After refilling with suitable coolant | + | After refilling with suitable [[coolant]], you will need to [[Bleed the cooling system|bleed]] the system. |
[[Category:Engine Cooling]] | [[Category:Engine Cooling]] | ||
[[Category:DIY]] | [[Category:DIY]] | ||
| + | [[Category:Fluid]] | ||
| + | [[Category:Lotus Elise]] | ||
| + | [[Category:S1]] | ||
| + | [[Category:S2]] | ||
