File:07resistorchange.jpg
07resistorchange.jpg (500 × 375 pixels, file size: 42 KB, MIME type: image/jpeg)
Resistor pack is attached with two screws (one you cant get at without removing the wiring). You might need new to cut the wiring from the existing mass of molten/corroded connectors and attach new red female crimps. You might be able to salvage the existing shrouded female crimps if you simply cut/snap off the entire male connector from the old resistor pack, soak the crimp in plusgas/wd40 and then extract the remains of the male connector with snipe nose pliers. Once replaced rewire as shown. For additional peace of mind, consider a liberal application of grease over the connectors to prevent/delay future corrosion.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:29, 21 December 2008 | | 500 × 375 (42 KB) | moetmoet (talk | contribs) | resistor pack has two screws. once replaced rewire as shown, will probably need new red spade connectors. |
| 22:12, 21 December 2008 |  | 2,816 × 2,112 (147 KB) | moetmoet (talk | contribs) | resistor pack has two screws. once replaced rewire as shown, will probably need new red spade connectors. | |
| 22:10, 21 December 2008 |  | 2,816 × 2,112 (317 KB) | moetmoet (talk | contribs) | resistor pack has two screws. once replaced rewire as shown, will probably need new red spade connectors. |
You cannot overwrite this file.
File usage
The following page links to this file:
