TechWiki - User contributions [en-gb]

Wheels and tyres - Evora

2016-06-13T19:01:12Z

Stefan A: /* Alternatives */

==Wheels==

===Lotus/OEM===
{| class="wikitable"
! Design !! Pictures !! Colours !! Size !! Part numbers !! Weight
|-
! Classic
| align="Center" | [[File:Evora Classic Wheel - Silver.jpg | Silver, cast]] [[File:Evora Classic Wheel - Stealth Grey.jpg | Stealth Grey, cast]]
| Silver - Cast Stealth Grey - Cast || Front: 8.0J x 18" Rear: 9.5J x 19" || Silver Front: A132G0006F Silver Rear: A132G0007F Stealth Grey Front: A132G0008F Stealth Grey Rear: B132G0009F || Front: 10.4kg Rear: 12.6kg
|-
! Sport
| align="Center" | [[File:Evora Sport Wheel - Silver.jpg | Silver, forged]] [[File:Evora Sport Wheel - Anthracite.jpg | Gloss Anthracite, forged]] [[File:Evora Sport Wheel - Diamond Cut.jpg | Diamond Cut, forged]]
| Silver - Forged Anthracite - Forged Diamond Cut - Forged || Front: 8.0J x 18" Rear: 9.5J x 19" || Silver Front: B132G0051F Silver Rear: B132G0052F Diamond Cut Front: A132G0102F Diamond Cut Rear: A132G0103F Anthracite Front: B132G0049F Anthracite Rear: B132G0050F || Front: 9.5kg Rear: 12.0kg

|-
! Turbine
| align="Center" | [[File:Evora Turbine Wheel - Diamond Cut.jpg | Diamond Cut, Forged]] || Diamond Cut - Forged || Front: 8.0J x 18" Rear: 9.5J x 19" || Left Front: ALS5G0003F Right Front: ALS5G0004F Left Rear: ALS5G0005F Right Rear: ALS5G0006F || N/A
|-
! Design
| align="Center" | [[File:Evora Design Wheel - Diamond Cut.jpg | Diamond Cut, Forged]] [[File:Evora Design Wheel - Gunmetal.jpg | Gunmetal, Forged | 120px]] [[File:Evora Design Wheel - Gloss Black.jpg | Gloss Black, Forged | 120px]]
| Diamond Cut - Forged Gunmetal - Forged Gloss Black - Forged Satin Gold - Forged || Front: 8.0J x 19" Rear: 9.5J x 20" || Diamond Cut Front: A132G0092F Diamond Cut Rear: A132G0094F Satin Gold Front: A132G0110F Satin Gold Rear: A132G0111F || N/A
|-
|}

===Aftermarket===

{| class="wikitable"
! Manufacturer !! Design !! Pictures !! Colours !! Size !! Notes !! Weight
|-
! PB Racing
| SD Motorsport Wheel Evora
| align="Center" | [[File:Evora - PB Racing - SD Motorsport Wheel.png | PB Racing SD Motorsport Wheel Evora| 118px]]
| -
| [http://www.pbracingshop.com/en/wheel/66-sd-motorsport-wheel-evora-18.html 18" front] 
[http://www.pbracingshop.com/en/wheel/67-sd-motorsport-wheel-evora-19.html 19" front or rear] 
[http://www.pbracingshop.com/en/wheel/70-sd-motorsport-wheel-evora-20.html 20" rear]
| Available in 18" (290€ per wheel), 19" (360€ per wheel) and 20" (400€ per wheel) to match standard Evora wheel sizes.
| -
|-
|}

===Motorsport===

{| class="wikitable"
! Manufacturer !! Design !! Pictures !! Colours !! Size !! Part numbers !! Notes !! Weight
|-
! Lotus Racing
| Rimstock Competition wheels
| align="Center" | [[File:Evora GTN - Chassis - Lotus Racing Wheel Package.jpg | Lotus Racing Rimstock Competition Wheels| 118px]]
| Black Silver
| Front: 8.5J x 18" Rear: 10J x 18"
| Set: ALS5G0023J
| Rimstock wheels sold by Lotus Racing for use with Evora GTS/GTN race cars
| Front: 10.6kg
Rear: 11.1kg
|-
|}

==Wheel Dimensions==

'''18" Front, 19" Rear'''

{| class="wikitable"
|-
! rowspan="2" | Type
! Standard
| Cast alloy, 10 spokes in pairs, silver or grey, 5-bolt fixing.
|-
! Optional
| Forged alloy, 10 radial spokes, silver or grey, 5-bolt fixing.
|-
! rowspan="2" | Size
! Front
| 8.0J x 18H2
|-
! Rear
| 9.5J x 19H2
|-
! rowspan="2" | Inset
! Front
| + 52 mm
|-
! Rear
| + 69 mm
|-
! colspan="2" | PCD
| 114.3mm
|-
! rowspan="3" | Wheel bolts
! Thread
| M12 x 1.5 x 26 mm
|-
! Torque
| 105 Nm
|-
! Seat
| 60° taper
|-
! colspan="2" | Centre spigot hole diameter
| 68 mm
|-
! colspan="2" | Radial run-out at bead seat
| 0.3 mm max.
|-
! colspan="2" | Laterial run-out at bead seat
|0.3 mm max.
|-
|}

Note that the inset figure is the displacement of the wheelrim centreline relative to the wheel/hub mounting face. A positive inset indicates that the wheelrim centreline lies inboard of the wheel mounting face, whereas a negative inset means the wheelrim centreline is outboard of the mounting face.

==Wheel Bolts==

The wheel bolts used are of a special design to suit the small diameter fixing tunnels in the wheel centres. The bolts have an M12 x1.5 thread, 60° conical seat, and a 10 spline socket head for which a special extension tool is supplied with the car.

A 17 mm a/f deep socket and 1/2 inch square drive torque wrench should be applied to the extension tool, with a tightening torque of 105 Nm required.

To protect against wheel theft, one of the five bolts securing each wheel is key coded, and requires a correspondingly coded adaptor tool. Fit the adaptor tool onto a 1/2 inch square drive extension, and rotate the adaptor until until full engagement into the bolt head is assured before applying torque. Note that an alignment mark is provided on the coded bolt head and adaptor tool to aid refitting. The spline drive extension and the coded adaptor tool are stowed in the vehicle tool pouch, and should remain with the car at all times to allow servicing or repairs to be performed.

The Part No. for the wheel bolts is A132G6002F.

==Tyres==

===OE Fitment===

The Evora is supplied as standard with [http://www.pirelli.com/tyre/ww/en/car/genericContent/p_zero Pirelli P-Zero tyres]. The fronts are 225/40 ZR18, the rears are 255/35 ZR19. Pressures as listed in the owners manual are front 33psi, rear 36 psi. This is increased to 40psi and 43psi if the car is heavily loaded. Pirelli produce different compounds for different manufacturers - for the Evora MO compound tyres are used on the front and MO1 for the rear<ref>[http://forums.seloc.org/viewthread.php?tid=351246 SELOC Forums » SELOC Chat » Pirelli P Zero Corsa tyres- is that the Porsche or the Ferrari version]</ref>.

If you opt for the larger diameter Design wheels then tyre sizes are increased to 235/35 R19 for the fronts and 275/30 R20 for the rears, with Pirelli P-Zero Corsa's becoming the standard fitment.

Winter tyres are also available from Lotus in the form of the [http://www2.yokohama-online.com/gb/tyre-products.php?g=151 Yokohama W. Drive] V902 'LTS'. These are 215/40 R18 on the front, 245/35 R19 on the rear and use the same pressures as the standard Pirellis.

===Alternatives===

Yokohama Advan Sport AD08's are also available to fit the Evora. Yokohama's were used during the cars development before switching to Pirelli P-Zeros for production.

Avon also makes the [http://www.avon-tyres.co.uk/car/zz5 ZZ5] in sizes to suit the Evora and aimed towards 'small to medium -sized high-performance cars'<ref>[http://www.tyrepress.com/News/1/22/22077.html Tyre Press - Avon launches ZZ5, UHP successor to ZZ3]</ref>. These have been tried by at least two forum members.<ref>[http://forums.seloc.org/viewthread.php?tid=363904 SELOC Forums » Technical Discussion » Avon ZZ5 tyres on the Evora]</ref>

Michelin Pilot Super Sport as used on the Evora 400 has been confirmed by Lotus as an acceptable alternative to Pirelli Corsa LS. Sizes 235/35 R19 91Y XL and 275/30 R20 97Y XL (non-branded). E-mail conversation with Lotus posted at Lotus Car Club of Sweden forum. <ref>[http://www.lccs.nu/forum/viewtopic.php?f=20&t=6345 LCCS Forum » Officiella nyheter från Lotus » Lotus godkänner Michelin PSS till Evora S]</ref>

===Motorsport===

As of 2013 the Lotus Cup UK and Europe series, which feature the Evora GTS, GTN and GT4 race cars, make use of the [http://www.avonmotorsport.com/road-legal/performance/zzr Avon Motorsport ZZR] road legal tyres in conjunction with the 18" [[Evora_GTN_Packages#Lotus_Racing_Wheel_Package | Rimstock wheels supplied by Lotus Racing]].

==References==
<references/>

[[Category:Lotus_Evora]]
[[Category:Wheels_and_tyres]]

Wheels and tyres - Evora

2014-06-24T19:13:39Z

Stefan A: /* Lotus/OEM */

==Wheels==

===Lotus/OEM===
{| class="wikitable"
! Design !! Pictures !! Colours !! Size !! Part numbers !! Weight
|-
! Classic
| align="Center" | [[File:Evora Classic Wheel - Silver.jpg | Silver, cast]] [[File:Evora Classic Wheel - Stealth Grey.jpg | Stealth Grey, cast]]
| Silver - Cast Stealth Grey - Cast || Front: 8.0J x 18" Rear: 9.5J x 19" || Silver Front: A132G0006F Silver Rear: A132G0007F Stealth Grey Front: A132G0008F Stealth Grey Rear: B132G0009F || Front: 10.4kg Rear: 12.6kg
|-
! Sport
| align="Center" | [[File:Evora Sport Wheel - Silver.jpg | Silver, forged]] [[File:Evora Sport Wheel - Anthracite.jpg | Gloss Anthracite, forged]] [[File:Evora Sport Wheel - Diamond Cut.jpg | Diamond Cut, forged]]
| Silver - Forged Anthracite - Forged Diamond Cut - Forged || Front: 8.0J x 18" Rear: 9.5J x 19" || Silver Front: B132G0051F Silver Rear: B132G0052F Diamond Cut Front: A132G0102F Diamond Cut Rear: A132G0103F Anthracite Front: B132G0049F Anthracite Rear: B132G0050F || Front: 9.5kg Rear: 12.0kg

|-
! Turbine
| align="Center" | [[File:Evora Turbine Wheel - Diamond Cut.jpg | Diamond Cut, Forged]] || Diamond Cut - Forged || Front: 8.0J x 18" Rear: 9.5J x 19" || Left Front: ALS5G0003F Right Front: ALS5G0004F Left Rear: ALS5G0005F Right Rear: ALS5G0006F || N/A
|-
! Design
| align="Center" | [[File:Evora Design Wheel - Diamond Cut.jpg | Diamond Cut, Forged]] [[File:Evora Design Wheel - Gunmetal.jpg | Gunmetal, Forged | 120px]] [[File:Evora Design Wheel - Gloss Black.jpg | Gloss Black, Forged | 120px]]
| Diamond Cut - Forged Gunmetal - Forged Gloss Black - Forged Satin Gold - Forged || Front: 8.0J x 19" Rear: 9.5J x 20" || Diamond Cut Front: A132G0092F Diamond Cut Rear: A132G0094F Satin Gold Front: A132G0110F Satin Gold Rear: A132G0111F || N/A
|-
|}

===Aftermarket===

{| class="wikitable"
! Manufacturer !! Design !! Pictures !! Colours !! Size !! Notes !! Weight
|-
! PB Racing
| SD Motorsport Wheel Evora
| align="Center" | [[File:Evora - PB Racing - SD Motorsport Wheel.png | PB Racing SD Motorsport Wheel Evora| 118px]]
| -
| [http://www.pbracingshop.com/en/wheel/66-sd-motorsport-wheel-evora-18.html 18" front] 
[http://www.pbracingshop.com/en/wheel/67-sd-motorsport-wheel-evora-19.html 19" front or rear] 
[http://www.pbracingshop.com/en/wheel/70-sd-motorsport-wheel-evora-20.html 20" rear]
| Available in 18" (290€ per wheel), 19" (360€ per wheel) and 20" (400€ per wheel) to match standard Evora wheel sizes.
| -
|-
|}

===Motorsport===

{| class="wikitable"
! Manufacturer !! Design !! Pictures !! Colours !! Size !! Part numbers !! Notes !! Weight
|-
! Lotus Racing
| Rimstock Competition wheels
| align="Center" | [[File:Evora GTN - Chassis - Lotus Racing Wheel Package.jpg | Lotus Racing Rimstock Competition Wheels| 118px]]
| Black Silver
| Front: 8.5J x 18" Rear: 10J x 18"
| Set: ALS5G0023J
| Rimstock wheels sold by Lotus Racing for use with Evora GTS/GTN race cars
| Front: 10.6kg
Rear: 11.1kg
|-
|}

==Wheel Dimensions==

'''18" Front, 19" Rear'''

{| class="wikitable"
|-
! rowspan="2" | Type
! Standard
| Cast alloy, 10 spokes in pairs, silver or grey, 5-bolt fixing.
|-
! Optional
| Forged alloy, 10 radial spokes, silver or grey, 5-bolt fixing.
|-
! rowspan="2" | Size
! Front
| 8.0J x 18H2
|-
! Rear
| 9.5J x 19H2
|-
! rowspan="2" | Inset
! Front
| + 52 mm
|-
! Rear
| + 69 mm
|-
! colspan="2" | PCD
| 114.3mm
|-
! rowspan="3" | Wheel bolts
! Thread
| M12 x 1.5 x 26 mm
|-
! Torque
| 105 Nm
|-
! Seat
| 60° taper
|-
! colspan="2" | Centre spigot hole diameter
| 68 mm
|-
! colspan="2" | Radial run-out at bead seat
| 0.3 mm max.
|-
! colspan="2" | Laterial run-out at bead seat
|0.3 mm max.
|-
|}

Note that the inset figure is the displacement of the wheelrim centreline relative to the wheel/hub mounting face. A positive inset indicates that the wheelrim centreline lies inboard of the wheel mounting face, whereas a negative inset means the wheelrim centreline is outboard of the mounting face.

==Wheel Bolts==

The wheel bolts used are of a special design to suit the small diameter fixing tunnels in the wheel centres. The bolts have an M12 x1.5 thread, 60° conical seat, and a 10 spline socket head for which a special extension tool is supplied with the car.

A 17 mm a/f deep socket and 1/2 inch square drive torque wrench should be applied to the extension tool, with a tightening torque of 105 Nm required.

To protect against wheel theft, one of the five bolts securing each wheel is key coded, and requires a correspondingly coded adaptor tool. Fit the adaptor tool onto a 1/2 inch square drive extension, and rotate the adaptor until until full engagement into the bolt head is assured before applying torque. Note that an alignment mark is provided on the coded bolt head and adaptor tool to aid refitting. The spline drive extension and the coded adaptor tool are stowed in the vehicle tool pouch, and should remain with the car at all times to allow servicing or repairs to be performed.

The Part No. for the wheel bolts is A132G6002F.

==Tyres==

===OE Fitment===

The Evora is supplied as standard with [http://www.pirelli.com/tyre/ww/en/car/genericContent/p_zero Pirelli P-Zero tyres]. The fronts are 225/40 ZR18, the rears are 255/35 ZR19. Pressures as listed in the owners manual are front 33psi, rear 36 psi. This is increased to 40psi and 43psi if the car is heavily loaded. Pirelli produce different compounds for different manufacturers - for the Evora MO compound tyres are used on the front and MO1 for the rear<ref>[http://forums.seloc.org/viewthread.php?tid=351246 SELOC Forums » SELOC Chat » Pirelli P Zero Corsa tyres- is that the Porsche or the Ferrari version]</ref>.

If you opt for the larger diameter Design wheels then tyre sizes are increased to 235/35 R19 for the fronts and 275/30 R20 for the rears, with Pirelli P-Zero Corsa's becoming the standard fitment.

Winter tyres are also available from Lotus in the form of the [http://www2.yokohama-online.com/gb/tyre-products.php?g=151 Yokohama W. Drive] V902 'LTS'. These are 215/40 R18 on the front, 245/35 R19 on the rear and use the same pressures as the standard Pirellis.

===Alternatives===

Yokohama Advan Sport AD08's are also available to fit the Evora. Yokohama's were used during the cars development before switching to Pirelli P-Zeros for production.

Avon also makes the [http://www.avon-tyres.co.uk/car/zz5 ZZ5] in sizes to suit the Evora and aimed towards 'small to medium -sized high-performance cars'<ref>[http://www.tyrepress.com/News/1/22/22077.html Tyre Press - Avon launches ZZ5, UHP successor to ZZ3]</ref>. These have been tried by at least two forum members.<ref>[http://forums.seloc.org/viewthread.php?tid=363904 SELOC Forums » Technical Discussion » Avon ZZ5 tyres on the Evora]</ref>

===Motorsport===

As of 2013 the Lotus Cup UK and Europe series, which feature the Evora GTS, GTN and GT4 race cars, make use of the [http://www.avonmotorsport.com/road-legal/performance/zzr Avon Motorsport ZZR] road legal tyres in conjunction with the 18" [[Evora_GTN_Packages#Lotus_Racing_Wheel_Package | Rimstock wheels supplied by Lotus Racing]].

==References==
<references/>

[[Category:Lotus_Evora]]
[[Category:Wheels_and_tyres]]

Wheels and tyres - Evora

2014-05-07T18:19:07Z

Stefan A: /* Motorsport */

==Wheels==

===Lotus/OEM===
{| class="wikitable"
! Design !! Pictures !! Colours !! Size !! Part numbers !! Weight
|-
! Classic
| align="Center" | [[File:Evora Classic Wheel - Silver.jpg | Silver, cast]] [[File:Evora Classic Wheel - Stealth Grey.jpg | Stealth Grey, cast]]
| Silver - Cast Stealth Grey - Cast || Front: 8.0J x 18" Rear: 9.5J x 19" || Silver Front: A132G0006F Silver Rear: A132G0007F Stealth Grey Front: A132G0008F Stealth Grey Rear: B132G0009F || Front: 10.4kg Rear: 12.6kg
|-
! Sport
| align="Center" | [[File:Evora Sport Wheel - Silver.jpg | Silver, forged]] [[File:Evora Sport Wheel - Anthracite.jpg | Gloss Anthracite, forged]] [[File:Evora Sport Wheel - Diamond Cut.jpg | Diamond Cut, forged]]
| Silver - Forged Anthracite - Forged Diamond Cut - Forged || Front: 8.0J x 18" Rear: 9.5J x 19" || Silver Front: B132G0051F Silver Rear: B132G0052F Diamond Cut Front: A132G0102F Diamond Cut Rear: A132G0103F Anthracite Front: B132G0049F Anthracite Rear: B132G0050F || Front: 9.5kg Rear: 12.0kg

|-
! Turbine
| align="Center" | [[File:Evora Turbine Wheel - Diamond Cut.jpg | Diamond Cut, Forged]] || Diamond Cut - Forged || Front: 8.0J x 18" Rear: 9.5J x 19" || Left Front: ALS5G0003F Right Front: ALS5G0004F Left Rear: ALS5G0005F Right Rear: ALS5G0006F || N/A
|-
! Design
| align="Center" | [[File:Evora Design Wheel - Diamond Cut.jpg | Diamond Cut, Forged]] [[File:Evora Design Wheel - Gunmetal.jpg | Gunmetal, Forged | 120px]] [[File:Evora Design Wheel - Gloss Black.jpg | Gloss Black, Forged | 120px]]
| Diamond Cut - Forged Gunmetal - Forged Gloss Black - Forged|| Front: 8.0J x 19" Rear: 9.5J x 20" || Diamond Cut Front: A132G0092F Diamond Cut Rear: A132G0094F || N/A
|-
|}

===Aftermarket===

{| class="wikitable"
! Manufacturer !! Design !! Pictures !! Colours !! Size !! Notes !! Weight
|-
! PB Racing
| SD Motorsport Wheel Evora
| align="Center" | [[File:Evora - PB Racing - SD Motorsport Wheel.png | PB Racing SD Motorsport Wheel Evora| 118px]]
| -
| [http://www.pbracingshop.com/en/wheel/66-sd-motorsport-wheel-evora-18.html 18" front] 
[http://www.pbracingshop.com/en/wheel/67-sd-motorsport-wheel-evora-19.html 19" front or rear] 
[http://www.pbracingshop.com/en/wheel/70-sd-motorsport-wheel-evora-20.html 20" rear]
| Available in 18" (290€ per wheel), 19" (360€ per wheel) and 20" (400€ per wheel) to match standard Evora wheel sizes.
| -
|-
|}

===Motorsport===

{| class="wikitable"
! Manufacturer !! Design !! Pictures !! Colours !! Size !! Part numbers !! Notes !! Weight
|-
! Lotus Racing
| Rimstock Competition wheels
| align="Center" | [[File:Evora GTN - Chassis - Lotus Racing Wheel Package.jpg | Lotus Racing Rimstock Competition Wheels| 118px]]
| Black Silver
| Front: 8.5J x 18" Rear: 10J x 18"
| Set: ALS5G0023J
| Rimstock wheels sold by Lotus Racing for use with Evora GTS/GTN race cars
| Front: 10.6kg
Rear: 11.1kg
|-
|}

==Wheel Dimensions==

'''18" Front, 19" Rear'''

{| class="wikitable"
|-
! rowspan="2" | Type
! Standard
| Cast alloy, 10 spokes in pairs, silver or grey, 5-bolt fixing.
|-
! Optional
| Forged alloy, 10 radial spokes, silver or grey, 5-bolt fixing.
|-
! rowspan="2" | Size
! Front
| 8.0J x 18H2
|-
! Rear
| 9.5J x 19H2
|-
! rowspan="2" | Inset
! Front
| + 52 mm
|-
! Rear
| + 69 mm
|-
! colspan="2" | PCD
| 114.3mm
|-
! rowspan="3" | Wheel bolts
! Thread
| M12 x 1.5 x 26 mm
|-
! Torque
| 105 Nm
|-
! Seat
| 60° taper
|-
! colspan="2" | Centre spigot hole diameter
| 68 mm
|-
! colspan="2" | Radial run-out at bead seat
| 0.3 mm max.
|-
! colspan="2" | Laterial run-out at bead seat
|0.3 mm max.
|-
|}

Note that the inset figure is the displacement of the wheelrim centreline relative to the wheel/hub mounting face. A positive inset indicates that the wheelrim centreline lies inboard of the wheel mounting face, whereas a negative inset means the wheelrim centreline is outboard of the mounting face.

==Wheel Bolts==

The wheel bolts used are of a special design to suit the small diameter fixing tunnels in the wheel centres. The bolts have an M12 x1.5 thread, 60° conical seat, and a 10 spline socket head for which a special extension tool is supplied with the car.

A 17 mm a/f deep socket and 1/2 inch square drive torque wrench should be applied to the extension tool, with a tightening torque of 105 Nm required.

To protect against wheel theft, one of the five bolts securing each wheel is key coded, and requires a correspondingly coded adaptor tool. Fit the adaptor tool onto a 1/2 inch square drive extension, and rotate the adaptor until until full engagement into the bolt head is assured before applying torque. Note that an alignment mark is provided on the coded bolt head and adaptor tool to aid refitting. The spline drive extension and the coded adaptor tool are stowed in the vehicle tool pouch, and should remain with the car at all times to allow servicing or repairs to be performed.

The Part No. for the wheel bolts is A132G6002F.

==Tyres==

===OE Fitment===

The Evora is supplied as standard with [http://www.pirelli.com/tyre/ww/en/car/genericContent/p_zero Pirelli P-Zero tyres]. The fronts are 225/40 ZR18, the rears are 255/35 ZR19. Pressures as listed in the owners manual are front 33psi, rear 36 psi. This is increased to 40psi and 43psi if the car is heavily loaded. Pirelli produce different compounds for different manufacturers - for the Evora MO compound tyres are used on the front and MO1 for the rear<ref>[http://forums.seloc.org/viewthread.php?tid=351246 SELOC Forums » SELOC Chat » Pirelli P Zero Corsa tyres- is that the Porsche or the Ferrari version]</ref>.

If you opt for the larger diameter Design wheels then tyre sizes are increased to 235/35 R19 for the fronts and 275/30 R20 for the rears, with Pirelli P-Zero Corsa's becoming the standard fitment.

Winter tyres are also available from Lotus in the form of the [http://www2.yokohama-online.com/gb/tyre-products.php?g=151 Yokohama W. Drive] V902 'LTS'. These are 215/40 R18 on the front, 245/35 R19 on the rear and use the same pressures as the standard Pirellis.

===Alternatives===

Yokohama Advan Sport AD08's are also available to fit the Evora. Yokohama's were used during the cars development before switching to Pirelli P-Zeros for production.

Avon also makes the [http://www.avon-tyres.co.uk/car/zz5 ZZ5] in sizes to suit the Evora and aimed towards 'small to medium -sized high-performance cars'<ref>[http://www.tyrepress.com/News/1/22/22077.html Tyre Press - Avon launches ZZ5, UHP successor to ZZ3]</ref>. These have been tried by at least two forum members.<ref>[http://forums.seloc.org/viewthread.php?tid=363904 SELOC Forums » Technical Discussion » Avon ZZ5 tyres on the Evora]</ref>

===Motorsport===

As of 2013 the Lotus Cup UK and Europe series, which feature the Evora GTS, GTN and GT4 race cars, make use of the [http://www.avonmotorsport.com/road-legal/performance/zzr Avon Motorsport ZZR] road legal tyres in conjunction with the 18" [[Evora_GTN_Packages#Lotus_Racing_Wheel_Package | Rimstock wheels supplied by Lotus Racing]].

==References==
<references/>

[[Category:Lotus_Evora]]
[[Category:Wheels_and_tyres]]