Editing Bulbs (section)

=S1=
Bulbs as fitted as standard to Series 1 Elises/Exiges.
<table cellspacing="0" cellpadding="3" border="1">
	<tr>
		<td rowspan=2><b>Fitment</b></td>
		<td colspan=2><b>Owner's manual</b></td>
		<td colspan=4><b>Actual bulb</b></td>
	</tr>
	<tr>
		<td><b>Wattage</b></td>
		<td><b>Type</b></td>
		<td><b>ECE cat.</b></td>
		<td><b>Lucas #</b></td>
		<td><b>IEC base</b></td>
		<td><b>Watts</b></td>
	</tr>
	<tr>
		<td>Headlight (Dipped and Main Beam)</td>
		<td align=right>60/55</td>
		<td>H4 P43t</td>
		<td>H4</td>
		<td>472</td>
		<td>P43t</td>
		<td align=right>55/60</td>
	</tr>
	<tr>
		<td>Driving Lamps</td>
		<td align=right>55</td>
		<td>H1</td>
		<td>H1</td>
		<td>448</td>
		<td>P14.5s</td>
		<td align=right>55</td>
	</tr>
	<tr>
		<td>Front Side Light</td>
		<td align=right>5</td>
		<td>W2x4.6d</td>
		<td>T4W</td>
		<td>233</td>
		<td>BA9s</td>
		<td align=right>4</td>
	</tr>
	<tr>
		<td>Front/rear Indicator</td>
		<td align=right>21</td>
		<td>SCC BA15s</td>
		<td>P21W</td>
		<td>382</td>
		<td>BA15s</td>
		<td align=right>21</td>
	</tr>
	<tr>
		<td>Side Repeater</td>
		<td align=right>5</td>
		<td>W2x4.6d</td>
		<td>W5W</td>
		<td>501</td>
		<td>W2.1x9.5d</td>
		<td align=right>5</td>
	</tr>
	<tr>
		<td>Brake/Tail</td>
		<td align=right>5/21</td>
		<td>SBC BAY15d</td>
		<td>P21/5W</td>
		<td>380</td>
		<td>BAY15d</td>
		<td align=right>21/5</td>
	</tr>
	<tr>
		<td>High Mount Brake</td>
		<td align=right>11</td>
		<td>891</td>
		<td>W5W</td>
		<td>501</td>
		<td>W2.1x9.5d</td>
		<td align=right>5</td>
	</tr>
	<tr>
		<td>Rear fog guard</td>
		<td align=right>21</td>
		<td>SCC BA15s</td>
		<td>P21W</td>
		<td>382</td>
		<td>BA15s</td>
		<td align=right>21</td>
	</tr>
	<tr>
		<td>Reversing</td>
		<td align=right>21</td>
		<td>SCC BA15s</td>
		<td>P21W</td>
		<td>382</td>
		<td>BA15s</td>
		<td align=right>21</td>
	</tr>
	<tr>
		<td>Number Plate</td>
		<td align=right>5</td>
		<td>SU 8.5-8</td>
		<td>C5W (35mm)</td>
		<td>239</td>
		<td>SV 8.5-8</td>
		<td align=right>5</td>
	</tr>
	<tr>
		<td>Interior</td>
		<td align=right>10</td>
		<td>SU 8.5-8</td>
		<td>C10W (41mm)</td>
		<td>264</td>
		<td>SV 8.5-8</td>
		<td align=right>10</td>
	</tr>
	<tr>
		<td>Cigaratte Lighter / 12V Power Outlet</td>
		<td align=right>1.2</td>
		<td>W2x4.6d</td>
		<td>W1.2W</td>
		<td>286</td>
		<td>W2x4.6d</td>
		<td align=right>1.2</td>
	</tr>
</table>
<!--
1. The original S1 Elise Service manual (Publication Part Number A111T0327J) lists the reversing light bulb as a 21W SCC BA15 rather than the 5W part listed above. This matches the P21W found when replacing the reversing lamp on a August 1999 S1. Both options use the same bayonet fitting, the 5W has a smaller glass part. The higher wattage bulb will pull 1.75A and is independently fused at 3A so is appropriate for the wiring. 21W is more normal for a modern reversing lamp. Not clear when the 5W parts were fitted or if this is an error.
-->