Editing Remote Boot Release for S2 (section)

==Shopping List==
*2m of bicycle brake cable (both inner & outer parts)
[[Image:bicycle-cable.jpg]]
*2x bicycle brake cable adjuster
[[Image:bicycle-cable-adjuster.jpg]]
*Central Door Locking Solenoid - I used a [http://www.maplin.co.uk/door-lock-motors-12304 YD79L] from Maplins - it includes several things I used in this HowTo. Don't be tempted to buy a cheap kit from eBay that looks the same, I got one and it broke within 2 presses of the button
[[Image:Yd79l.jpg]]
*A button
[[Image:button.jpg]]
*A 4-pin 12v automotive relay - you need one which has an open switch when the coil is not energised, and closed when it is energised.
[[Image:4-pin-12V-automotive-relay.jpg]]
*Some male & female spade connectors
*Some cable ties
*Electrical insulation tape
*Double sided tape / velcro
*Some wire (I used about 6m or so of 7 amp wire, available from Halfrauds for about £3.79 per 6m reel). The amount you will use/need will depend on where you choose to get the power/ground from, where you want to locate your button, the solenoid and the relay.
*Beers.