Editing Brake discs (section)

===Lotus Motorsport===


====Lotus Motorsport Brake Bias Valve====
Lotus Motorsport Brake Bias Valve, as used on the Elise S2 Sport 190 and VX220 Sprint.  This allow the front/rear brake balance to be adjusted.
(Lotus Part Number:ALS1J6012F) 
[[Image:brakebias.JPG|thumb|right|Lotus Motorsport Brake Bias Valve]]
{{Clr}}

====Lotus Motorsport Brake Master Cylinder====
(Lotus Part Number: ALS1J6010F)
Actually available only through Maidstone Sports Cars who gets small batches from AP. 325 GBP + VAT.

====Lotus Offical upgrade kit for the S2====
[[Image:brakeupgrade1.JPG|thumb|right|Upgrade Caliper and Discs]][[Image:brakeupgrade2.JPG|thumb|right|Upgrade bolts]][[Image:brakeupgrade3.JPG|thumb|right|Upgrade Pads]]    [[Image:APBigBrakeCaliper.jpg|thumb|right|Upgrade Caliper]][[Image:APBigBrakeCaliper2.jpg|thumb|right|Upgrade Caliper and Disc]]
Lotus Motorsport supplied bolt on kit that comes with 2 x AP 4 pot alloy calipers with Pagid RS14 Pads and 2 x alloy bells with discs.

(Lotus Part Number:ALS3J0045S Fast road - Ferodo pads, single piece discs - Exige S 240 later option)

(Lotus Part Number:ALS3J0046S Sport - Pagid pads, two piece discs - Exige 260 later option)

(Lotus Part Number:A120J6010F - Early Option - Exige S 240/260)


From Lotus Motorsport:

 Fittings are also included.
 Track Use Only
 
 The pads are 16mm thick with an area of 43.2cm2 and are Pagid RS14 ceramic friction material.
 
 They are full race pads with a medium to high friction value.
 
 The discs are 310mm outside diameter and 28mm thick and weigh 4.9kg 
 
 The Caliper is a 2 piece aluminium alloy body with 38.10mm diameter piston bores. Weight is 2.3kg
  
 Designed to fit the following cars using a 16inch Front wheel:
 
  - Elise S2 (with OZ wheels + 3mm spacer) 
  - Elise 111R - with Exige S2/Forged Alloy wheels 
  - Exige S2 - direct fitment
 
 This kit will not fit Elise S1 or Exige S1. 
 
 Lotus recommend use with braided brake hoses 
 
 Lotus Part Number:ALS3J0040F 
 
 Price £1,762.50 inc VAT


{{Clr}}