Editing Evora front bumper removal (section)

==Remove arch liners==

Remove the 8 fasteners from each wheel arch liner.

These 2 at the front (circled black)

[[image:Evora-Bumper-Removal-1.jpg|400px]]

This one in front of the spring

[[image:Evora-Bumper-Removal-2.jpg|400px]]

This one behind the spring.

[[image:Evora-Bumper-Removal-3.jpg|400px]]

This one under the body behind the mudflap (it was dark - sorry)

[[image:Evora-Bumper-Removal-4.jpg|400px]]

There are 3 more along the inside edge of the wheel arch, a plastic one just above the mudflap.

[[image:Evora-Bumper-Removal-5.jpg|400px]]

...a metal one at the top

[[image:Evora-Bumper-Removal-6.jpg|400px]]

...and finally another plastic one at the front of the arch, just above where the bumper and clam meet.

[[image:Evora-Bumper-Removal-7.jpg|400px]]

Remove Mudflap (4 screws - mine are stainless as i replaced the brackets and fasteners recently)

[[image:Evora-Bumper-Removal-8.jpg|400px]]

Now, gently pull away at the wheel arch liner and it will detach.
Rest it on the front wheel to help keep it's shape. (well, that's what i did).

Repeat for other side.

Now we can examine the chassis and pipework, brackets, fasteners etc.

[[image:Evora-Bumper-Removal-9.jpg|400px]]

[[image:Evora-Bumper-Removal-10.jpg|400px]]