Editing Central Locking Module Replacement (section)

===Remove module===
[[Image:CDLModuleReplace5.jpg|left|thumb|Module 1]]
[[Image:CDLModuleReplace6.jpg|none|thumb|Module 2]]
<br>
You can now see the module. It's on the right under the big bit of foam with the orange wire sticking out of it. You need to unplug the module, the connector seemed to come off quite easily with a bit of wiggling. To get the circuit board out of the case I just jammed a smallish screwdriver down the left side of the circuit board and levered it out bit by bit.

Once the board is out you can put the new one in. The bit of grey foam gets in the way here, I managed to use the CDL connector to hold the foam up out of the way so I could get the new board in. It's quite tricky as you can't see what you're doing so you have to do it by feel.

Test that the new module works as expected.