Editing Remove S2 Dash Top (section)

===Remove plastic capping panel===

The manual says to remove the air vents from the panel.  Only the topmost rotating bit needs to be removed here.  On my car there were 2 screws in each vent attaching the capping panel to the dash fascia panel.  These are not mentioned in the manual, and will need to be removed.  The capping panel can then be pulled free (with a bit of force !)

Remove the two screws holding the dash fascia to the frame.  The drivers side one is shown on the picture above (upper green circle), and the passenger one is found likewise.

[[Image:s2dash005.jpg|thumb|left|Click to enlarge:Plastic capping panel removed]]
{{clr}}