Editing Subwoofer (section)

===Remote control===

With the side panel out you could also route the remote unit cable along the oddments shelf and I used the groove in the rear as a cable track for the telephone style cable. All these leads can then be routed down behind the side trim and for it to emerge just underneath. You could put the side panel back now or wait until tidy up phase at the end.


{| class="wikitable"
|-
! rowspan="2" | [[image:Subbyshelfsidepanel.jpg|200px]]
! Image
|-
| Cables hidden behind side panel
|-
|}


{| class="wikitable"
|-
! rowspan="2" | [[image:Undershelf.jpg|200px]]
! Image
|-
| Cables emerge under shelf
|-
|}

So now you have;
- the telephone style cable for the remote with the telephone plug to plug in directly to the subwoofer
- two phono connectors to mate into the ones from the block connector.
- the +ve cable from you earlier efforts with a bullet connector (to connect with the bullet socket back to the main block)
- the earth will already be connected into the main block
- the power control cable (blue/white) that senses when to turn the subwoofer on and off (straight into the main block)