Editing Wheels and tyres - Exige V6 (section)

==Wheel Dimensions==

Details provided by Simon Bichara<ref>[http://forums.seloc.org/p/6089781 SELOC Forums » SELOC Chat » New Exige S Begins Production]</ref>.

{| class="wikitable"
|-
! Type
! Standard
| Cast alloy, 5 spoke-split in pairs, silver or black, 5-bolt fixing with diamond cut machine finish on the 5 radial spokes
|-
! rowspan="2" | Size
! Front
| 7.5J x 17 H2 ET 26.3
|-
! Rear
| 9.5J x 18 H2 ET35
|-
! rowspan="2" | Inset
! Front
| + 26.0 mm
|-
! Rear
| + 35.0 mm
|-
! rowspan="2" | PCD
! Front
| 5x110.0 ± 0.1 mm
|-
! Rear
| 5x114.3 ± 0.1 mm
|-
! rowspan="3" | Wheel bolts
! Thread
| M12 x 1.5 x 26 mm
|-
! Torque
| 105 Nm
|-
! Seat
| 60° taper
|-
! colspan="2" | Centre spigot hole diameter front
| 65 mm
|-
! colspan="2" | Centre spigot hole diameter rear
| 68 mm
|-
! colspan="2" | Radial run-out at bead seat
| 0.3 mm max.
|-
! colspan="2" | Laterial run-out at bead seat
|0.3 mm max.
|-
|}

Note that the inset figure is the displacement of the wheelrim centreline relative to the wheel/hub mounting face. A positive inset indicates that the wheelrim centreline lies inboard of the wheel mounting face, whereas a negative inset means the wheelrim centreline is outboard of the mounting face.