Editing Change the ignition switch (section)

==== Assemble the ignition switch ====
# Use the (removed) ignition lock to ensure the switch is set to position I and the latch can be pressed in (see picture)
# Insert in the switch on the dowel and screw in the grub screw. Don't fully tighten yet. 
# Insert the ignition lock (see above)
# Tighten the grub screw
# If you removed the cover of the plug reattach it
# Press the plug in the switch until it latches
# Reconnect the battery and test switch
# Reattach the shroud