View source for File:15. Greasing New Ball Joint Rubber.JPG

← File:15. Greasing New Ball Joint Rubber.JPG

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

Step 14. You may wish to put new ball joints in the freezer for a day or two. This ensures an easy fit into the wishbone. Grease the rubber dust cover so that it does not snag.

Return to File:15. Greasing New Ball Joint Rubber.JPG.

Retrieved from ‘https://wiki.seloc.org/a/File:15._Greasing_New_Ball_Joint_Rubber.JPG’