Editing Helper springs

'''Helper springs''' are usually the 4lbs type that have no influence on the actual ride/handing of the car as they only provide some means of keeping the main spring seated.

As the [[ride height]] of the car is lowered, by reducing pre-load on the main spring, there becomes a point you need helper springs to keep the main spring in check (seated) as the suspension extends completely.

2.25" helpers and joiners here http://www.dfaulknersprings.co.uk/helpers.htm



'''Eibach Springs - Understanding Spring Codes'''

Eibach ERS 'imperial' springs are coded as:
 
0600.225.0125
 
length.diameter.lb/in
 
So that would be a 6 inch long, 2.25" diamater and 125 lb/in spring.
 
[[Category:Suspension]]