Editing Remove the undertray

{{Infobox Timetools
|time  = 5mins
|tools = 8mm Socket
}}

[[Image:Remove the front undertray step 4.jpg|thumb|left|Topside of front undertray from Elise S2]]
{{clr}}

== Procedure ==
<gallery>
Image:Remove the front undertray step 1.jpg|Remove the three screws (8mm socket) securing the undertray to the front clamshell
Image:Remove the front undertray step 2.jpg|This shows the rear lip securing the undertray.
Image:Remove the front undertray step 3.jpg|Remove the nine screws (8mm socket) securing the undertray to the chassis
Image:Remove the front undertray step 4.jpg|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car
</gallery>

== Refitting ==
Not easy to refit without positioning yourself under the car.

# From below, slide the undertray inside the clamshell.
#* Make sure it's the right way up!
# Key the rear of the undertray into the lip.
# Replace all 12 screws.
#* The rear three screws are secured with [http://www.loctite.com/int_henkel/loctite_uk/index.cfm Loctite].

[[Category:DIY]]
[[Category:Body]]
[[Category:Lotus Elise]]
[[Category:S2]]