Headlight Switch Panel - Revision history

rbirkby: Convention in wikis is only to link first occurence of a term

2007-09-03T21:21:54Z

Convention in wikis is only to link first occurence of a term

← Older revision		Revision as of 21:21, 3 September 2007
Line 7:		Line 7:
	# Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires		# Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires
	# Remove the plastic surrounding the heater controls in the same way as in step 1		# Remove the plastic surrounding the heater controls in the same way as in step 1
	# Unbolt the [[Stack]] instrument panel using a 10mm socket set.		# Unbolt the Stack instrument panel using a 10mm socket set.
	# The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off.		# The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off.
	# The switch connectors just pull off the switch bodies.		# The switch connectors just pull off the switch bodies.

rbirkby: +Electrical category

2007-09-03T21:20:59Z

+Electrical category

← Older revision		Revision as of 21:20, 3 September 2007
Line 18:		Line 18:
	[[Category:S2]]		[[Category:S2]]
	[[Category:S1]]		[[Category:S1]]
			[[Category:Electrical]]

rbirkby: +S1 cat. I originally wrote the topic after performing this on an S1.

2007-09-03T21:18:33Z

+S1 cat. I originally wrote the topic after performing this on an S1.

← Older revision		Revision as of 21:18, 3 September 2007
Line 17:		Line 17:
	[[Category:Lotus Elise]]		[[Category:Lotus Elise]]
	[[Category:S2]]		[[Category:S2]]
			[[Category:S1]]

Mr Wiki at 13:16, 17 April 2007

2007-04-17T13:16:17Z

← Older revision		Revision as of 13:16, 17 April 2007
Line 15:		Line 15:

	[[Category:Interior]]		[[Category:Interior]]
			[[Category:Lotus Elise]]
			[[Category:S2]]

Mr Wiki at 13:07, 12 April 2007

2007-04-12T13:07:50Z

← Older revision		Revision as of 13:07, 12 April 2007
Line 1:		Line 1:
	The '''Headlight Switch Panel''' in an Elise is situated next to the [[stack]]/steering wheel on the [[dashboard]].		The '''Headlight Switch Panel''' in an Elise is situated next to the [[stack]]/steering wheel on the dashboard.

	==Removal==		==Removal==

Mr Wiki at 13:07, 12 April 2007

2007-04-12T13:07:04Z

← Older revision		Revision as of 13:07, 12 April 2007
Line 1:		Line 1:
	The '''Headlight Switch Panel''' in an [[Elise]] is situated next to the [[stack]]/steering wheel on the [[dashboard]].		The '''Headlight Switch Panel''' in an Elise is situated next to the [[stack]]/steering wheel on the [[dashboard]].

	==Removal==		==Removal==

Mr Wiki: stack

2007-01-17T21:43:11Z

stack

← Older revision		Revision as of 21:43, 17 January 2007
Line 1:		Line 1:
	The '''Headlight Switch Panel''' in an [[Elise]] is situated next to the [[~~instrument binacle~~]]/steering wheel on the [[dashboard]].		The '''Headlight Switch Panel''' in an [[Elise]] is situated next to the [[stack]]/steering wheel on the [[dashboard]].

	==Removal==		==Removal==
Line 7:		Line 7:
	# Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires		# Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires
	# Remove the plastic surrounding the heater controls in the same way as in step 1		# Remove the plastic surrounding the heater controls in the same way as in step 1
	# Unbolt the Stack instrument panel using a 10mm socket set.		# Unbolt the [[Stack]] instrument panel using a 10mm socket set.
	# The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off.		# The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off.
	# The switch connectors just pull off the switch bodies.		# The switch connectors just pull off the switch bodies.

rbirkby: Adds category

2006-09-26T08:40:01Z

Adds category

← Older revision		Revision as of 08:40, 26 September 2006
Line 12:		Line 12:

	There's a lot of unscrewing there - so if you're lucky to have long wires some of the steps can be omitted.		There's a lot of unscrewing there - so if you're lucky to have long wires some of the steps can be omitted.


			[[Category:Interior]]

rbirkby: Intial Creation

2006-09-26T08:34:10Z

Intial Creation

New page

The '''Headlight Switch Panel''' in an [[Elise]] is situated next to the [[instrument binacle]]/steering wheel on the [[dashboard]].

==Removal==

# Remove the plastic surrounding the switches. This can be done using a couple of credit cards wedged into the top and lever the top down.
# Remove the aluminium panel which the lights are attached to. This has 2 screws at the top and 2 screws on the face. If they are hidden behind the black adhesive sticker, then puncture a hole through the sticker.
# Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires
# Remove the plastic surrounding the heater controls in the same way as in step 1
# Unbolt the Stack instrument panel using a 10mm socket set.
# The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off.
# The switch connectors just pull off the switch bodies.

There's a lot of unscrewing there - so if you're lucky to have long wires some of the steps can be omitted.