Remove the undertray - Revision history

Lithopsian: the front undertray is a smaller rectangular tray at the well ... front of the car - remove comments that actually apply to the front undertray

2023-03-05T17:58:38Z

the front undertray is a smaller rectangular tray at the well ... front of the car - remove comments that actually apply to the front undertray

← Older revision		Revision as of 17:58, 5 March 2023
Line 5:		Line 5:

	[[Image:Remove the front undertray step 4.jpg\|thumb\|left\|Topside of front undertray from Elise S2]]		[[Image:Remove the front undertray step 4.jpg\|thumb\|left\|Topside of front undertray from Elise S2]]
	~~The front undertray needs to be removed for a variety of reasons such as to [[replace the anti-roll bar]],~~

	~~This undertray is very important as it brings rigidity to the whole front of the car.~~
	{{clr}}		{{clr}}

Lithopsian: Lithopsian moved page Remove the front undertray to Remove the undertray: not about the front undertray

2023-03-05T17:56:53Z

Lithopsian moved page Remove the front undertray to Remove the undertray: not about the front undertray

← Older revision	Revision as of 17:56, 5 March 2023
(No difference)

Mr Wiki at 13:42, 17 April 2007

2007-04-17T13:42:04Z

← Older revision		Revision as of 13:42, 17 April 2007
Line 28:		Line 28:

	[[Category:DIY]]		[[Category:DIY]]
			[[Category:Body]]
			[[Category:Lotus Elise]]
			[[Category:S2]]

cocjh1: /* Refitting */

2006-09-10T21:11:10Z

Refitting

← Older revision		Revision as of 21:11, 10 September 2006
Line 19:		Line 19:

	== Refitting ==		== Refitting ==
	Not easy to refit ~~on your own, in fact, almost impossible~~.		Not easy to refit without positioning yourself under the car.

	# From below, slide the undertray inside the clamshell.		# From below, slide the undertray inside the clamshell.

cocjh1 at 20:29, 9 September 2006

2006-09-09T20:29:39Z

← Older revision		Revision as of 20:29, 9 September 2006
Line 1:		Line 1:
			{{Infobox Timetools
			\|time = 5mins
			\|tools = 8mm Socket
			}}

	[[Image:Remove the front undertray step 4.jpg\|thumb\|left\|Topside of front undertray from Elise S2]]		[[Image:Remove the front undertray step 4.jpg\|thumb\|left\|Topside of front undertray from Elise S2]]
	The front undertray needs to be removed for a variety of reasons such as to [[replace the anti-roll bar]],		The front undertray needs to be removed for a variety of reasons such as to [[replace the anti-roll bar]],

cocjh1: /* Refitting */

2006-09-09T20:28:09Z

Refitting

← Older revision		Revision as of 20:28, 9 September 2006
Line 14:		Line 14:

	== Refitting ==		== Refitting ==
	Not easy to refit on your own, in fact, ~~also~~ impossible.		Not easy to refit on your own, in fact, almost impossible.

	# From below, slide the undertray inside the clamshell.		# From below, slide the undertray inside the clamshell.

cocjh1 at 20:07, 9 September 2006

2006-09-09T20:07:24Z

← Older revision		Revision as of 20:07, 9 September 2006
Line 21:		Line 21:
	# Replace all 12 screws.		# Replace all 12 screws.
	#* The rear three screws are secured with [http://www.loctite.com/int_henkel/loctite_uk/index.cfm Loctite].		#* The rear three screws are secured with [http://www.loctite.com/int_henkel/loctite_uk/index.cfm Loctite].

			[[Category:DIY]]

cocjh1 at 20:05, 9 September 2006

2006-09-09T20:05:17Z

← Older revision		Revision as of 20:05, 9 September 2006
Line 12:		Line 12:
	Image:Remove the front undertray step 4.jpg\|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car		Image:Remove the front undertray step 4.jpg\|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car
	</gallery>		</gallery>

	* The rear three screws are secured with [http://www.loctite.com/int_henkel/loctite_uk/index.cfm Loctite].

	== Refitting ==		== Refitting ==
Line 22:		Line 20:
	# Key the rear of the undertray into the lip.		# Key the rear of the undertray into the lip.
	# Replace all 12 screws.		# Replace all 12 screws.
			#* The rear three screws are secured with [http://www.loctite.com/int_henkel/loctite_uk/index.cfm Loctite].

cocjh1 at 20:04, 9 September 2006

2006-09-09T20:04:53Z

← Older revision		Revision as of 20:04, 9 September 2006
Line 1:		Line 1:
	[[~~Image:~~Image:Remove the front undertray.jpg\|thumb\|left\|Topside of front undertray from Elise S2]]		[[Image:Remove the front undertray step 4.jpg\|thumb\|left\|Topside of front undertray from Elise S2]]
	The front undertray needs to be removed for a variety of reasons such as to [[replace the anti-roll bar]],		The front undertray needs to be removed for a variety of reasons such as to [[replace the anti-roll bar]],

			This undertray is very important as it brings rigidity to the whole front of the car.
	{{clr}}		{{clr}}

	==Procedure==		== Procedure ==
	<gallery>		<gallery>
	Image:Remove the front undertray step 1.jpg\|Remove the three screws (8mm socket) securing the undertray to the front clamshell		Image:Remove the front undertray step 1.jpg\|Remove the three screws (8mm socket) securing the undertray to the front clamshell
	Image:Remove the front undertray step 2.jpg\|		Image:Remove the front undertray step 2.jpg\|This shows the rear lip securing the undertray.
	Image:Remove the front undertray step 3.jpg\|Remove the nine screws (8mm socket) securing the undertray to the chassis		Image:Remove the front undertray step 3.jpg\|Remove the nine screws (8mm socket) securing the undertray to the chassis
	Image:Remove the front undertray step 4.jpg\|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car		Image:Remove the front undertray step 4.jpg\|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car
	</gallery>		</gallery>

			* The rear three screws are secured with [http://www.loctite.com/int_henkel/loctite_uk/index.cfm Loctite].

			== Refitting ==
			Not easy to refit on your own, in fact, also impossible.

			# From below, slide the undertray inside the clamshell.
			#* Make sure it's the right way up!
			# Key the rear of the undertray into the lip.
			# Replace all 12 screws.

cocjh1 at 19:52, 9 September 2006

2006-09-09T19:52:24Z

New page

[[Image:Image:Remove the front undertray.jpg|thumb|left|Topside of front undertray from Elise S2]]
The front undertray needs to be removed for a variety of reasons such as to [[replace the anti-roll bar]],
{{clr}}

==Procedure==
<gallery>
Image:Remove the front undertray step 1.jpg|Remove the three screws (8mm socket) securing the undertray to the front clamshell
Image:Remove the front undertray step 2.jpg|
Image:Remove the front undertray step 3.jpg|Remove the nine screws (8mm socket) securing the undertray to the chassis
Image:Remove the front undertray step 4.jpg|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car
</gallery>