Replace the coolant - Revision history

rbirkby: Add image.

2008-02-25T10:18:42Z

Add image.

← Older revision		Revision as of 10:18, 25 February 2008
Line 1:		Line 1:
			[[Image:S1DriversWheelarch.jpg\|thumb\|right\|Drivers side wheelarch on an S1 with the liner removed]]
	To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.		To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.

rbirkby: Fix grammar

2008-02-24T16:37:58Z

Fix grammar

← Older revision		Revision as of 16:37, 24 February 2008
Line 1:		Line 1:
	To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.		To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.

	After refilling with suitable [[coolant]] ~~the system~~ will need to [[Bleed the cooling system\|bleed]] the system.		After refilling with suitable [[coolant]], you will need to [[Bleed the cooling system\|bleed]] the system.

	[[Category:Engine Cooling]]		[[Category:Engine Cooling]]

Mr Wiki at 14:34, 18 April 2007

2007-04-18T14:34:29Z

← Older revision		Revision as of 14:34, 18 April 2007
Line 1:		Line 1:
	To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.		To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.

	After refilling with suitable [[coolant]] the system will need to [[~~How to bleed~~ the cooling system\|bleed]] the system.		After refilling with suitable [[coolant]] the system will need to [[Bleed the cooling system\|bleed]] the system.

	[[Category:Engine Cooling]]		[[Category:Engine Cooling]]

Mr Wiki at 13:43, 17 April 2007

2007-04-17T13:43:28Z

← Older revision		Revision as of 13:43, 17 April 2007
Line 5:		Line 5:
	[[Category:Engine Cooling]]		[[Category:Engine Cooling]]
	[[Category:DIY]]		[[Category:DIY]]
			[[Category:Fluid]]
			[[Category:Lotus Elise]]
			[[Category:S1]]
			[[Category:S2]]

cocjh1 at 17:10, 11 September 2006

2006-09-11T17:10:39Z

← Older revision		Revision as of 17:10, 11 September 2006
Line 1:		Line 1:
	To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.		To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.

	After refilling with suitable coolant the system will need to [[How to bleed the cooling system\|bleed]] the system.		After refilling with suitable [[coolant]] the system will need to [[How to bleed the cooling system\|bleed]] the system.

	[[Category:Engine Cooling]]		[[Category:Engine Cooling]]
	[[Category:DIY]]		[[Category:DIY]]

cocjh1 at 17:10, 11 September 2006

2006-09-11T17:10:09Z

← Older revision		Revision as of 17:10, 11 September 2006
Line 1:		Line 1:
	To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.		To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.

	After refilling with suitable coolant the system will need to [[bleed]] the system.		After refilling with suitable coolant the system will need to [[How to bleed the cooling system\|bleed]] the system.

	[[Category:Engine Cooling]]		[[Category:Engine Cooling]]
	[[Category:DIY]]		[[Category:DIY]]

Sinatra at 21:51, 10 September 2006

2006-09-10T21:51:02Z

← Older revision		Revision as of 21:51, 10 September 2006
Line 1:		Line 1:
	To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.		To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.

			After refilling with suitable coolant the system will need to [[bleed]] the system.

	[[Category:Engine Cooling]]		[[Category:Engine Cooling]]
	[[Category:DIY]]		[[Category:DIY]]

cocjh1 at 20:48, 25 August 2006

2006-08-25T20:48:35Z

← Older revision		Revision as of 20:48, 25 August 2006
Line 1:		Line 1:
	To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.		To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.

			[[Category:Engine Cooling]]
			[[Category:DIY]]

cocjh1 at 20:38, 25 August 2006

2006-08-25T20:38:45Z

New page

To drain the engine cooling system, remove the header tank cap, and disconnect the radiator feed and return hoses from the rear ends of the water rails running down each sill.