Replace the exhaust silencer - Revision history

Koen137: /* S1 */

2019-11-22T14:54:29Z

← Older revision		Revision as of 14:54, 22 November 2019
Line 34:		Line 34:
	Put a jack or axel stand under the exhaust so it doesn't fall on your face.		Put a jack or axel stand under the exhaust so it doesn't fall on your face.

	Remove the three exhaust hanger rubbers - two 13mm AF nuts on each - on early S1 you might have to build out the boot bag and the foam underneath as you need also a 10mm ring spanner to hold the bolts as they are not fixed - this will make it very easy to remove the bolt of the mounts of the silencer		Remove the three exhaust hanger rubbers - two 13mm AF nuts on each - on early S1 you might have to build out the boot bag and the foam underneath as you need also a 10mm ring spanner to hold the bolts as they are not fixed - this will make it very easy to remove the bolt and nuts of the mounts of the silencer

	The exhaust and cat should now be free.		The exhaust and cat should now be free.

Koen137: /* S1 */

2019-11-22T14:51:55Z

← Older revision		Revision as of 14:51, 22 November 2019
Line 34:		Line 34:
	Put a jack or axel stand under the exhaust so it doesn't fall on your face.		Put a jack or axel stand under the exhaust so it doesn't fall on your face.

	Remove the three exhaust hanger rubbers - two 13mm AF nuts on each		Remove the three exhaust hanger rubbers - two 13mm AF nuts on each - on early S1 you might have to build out the boot bag and the foam underneath as you need also a 10mm ring spanner to hold the bolts as they are not fixed - this will make it very easy to remove the bolt of the mounts of the silencer

	The exhaust and cat should now be free.		The exhaust and cat should now be free.

cocjh1: /* FITTING */

2008-09-16T21:55:25Z

FITTING

← Older revision		Revision as of 21:55, 16 September 2008
Line 88:		Line 88:

	Step 1:		Step 1:
	[~~http://wiki.seloc.org/index.php/Rear_tray~~ Remove the ~~Rear Undertray~~]		[[Remove the rear undertray]]

matty D: /* FITTING */

2007-10-19T21:21:41Z

FITTING

← Older revision		Revision as of 21:21, 19 October 2007
Line 107:		Line 107:
	{{clr}}		{{clr}}
	I used a good half a can on the bolts by soaking them and leaving for half an hour or so then and re-soaking them.		I used a good half a can on the bolts by soaking them and leaving for half an hour or so then and re-soaking them.

			It can help to remove the nearside rear wheel, inorder to gain access to the back of the cat bolts. You will also be able to get better leaverage from here.

Mr Wiki at 13:44, 17 April 2007

2007-04-17T13:44:49Z

← Older revision		Revision as of 13:44, 17 April 2007
Line 130:		Line 130:
	[[Category:Exhaust]]		[[Category:Exhaust]]
	[[Category:DIY]]		[[Category:DIY]]
			[[Category:Lotus Elise]]
			[[Category:S1]]
			[[Category:S2]]

Mr Wiki at 10:32, 22 January 2007

2007-01-22T10:32:12Z

← Older revision		Revision as of 10:32, 22 January 2007
Line 112:		Line 112:

	[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]		[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]
	[[Image:lamba.JPG\|thumb\|left\|~~Lamba~~ Sensor]]		[[Image:lamba.JPG\|thumb\|left\|Lambda Sensor]]
	[[Image:lamba2.JPG\|thumb\|left\|~~Lamba~~ Sensor]]		[[Image:lamba2.JPG\|thumb\|left\|Lambda Sensor]]
	[[Image:Flexi.JPG\|thumb\|left\|Flexi Section of the Sports Cat]]		[[Image:Flexi.JPG\|thumb\|left\|Flexi Section of the Sports Cat]]
	[[Image:sportscat.JPG\|thumb\|left\|Sports Cat Fitted]]		[[Image:sportscat.JPG\|thumb\|left\|Sports Cat Fitted]]

Mr Wiki: /* FITTING */

2007-01-22T10:29:47Z

FITTING

← Older revision		Revision as of 10:29, 22 January 2007
Line 112:		Line 112:

	[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]		[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]
			[[Image:lamba.JPG\|thumb\|left\|Lamba Sensor]]
			[[Image:lamba2.JPG\|thumb\|left\|Lamba Sensor]]
			[[Image:Flexi.JPG\|thumb\|left\|Flexi Section of the Sports Cat]]
			[[Image:sportscat.JPG\|thumb\|left\|Sports Cat Fitted]]
			[[Image:sportscat2.JPG\|thumb\|left\|Sports Cat Fitted]]
			[[Image:exhausthanger.JPG\|thumb\|left\|Elise Exhaust Mounts]]

	[[Image:exhaustoff.JPG\|thumb\|left\|Exhaust finnaly out]]		[[Image:exhaustoff.JPG\|thumb\|left\|Exhaust finnaly out]]
	{{clr}}		{{clr}}

Mr Wiki at 10:15, 22 January 2007

2007-01-22T10:15:54Z

← Older revision		Revision as of 10:15, 22 January 2007
Line 1:		Line 1:
	Replacing the exhaust silencer on the Elise is relatevely simple. The hardest part is removing the three bolts securing the silencer to the [[CAT]].		Replacing the exhaust silencer on the Elise is relatevely simple. The hardest part is removing the three bolts securing the silencer to the [[CAT]].

	==S1==		===S1===

	Tools		Tools
Line 44:		Line 44:
	copper grease everything liberally before putting it back together.		copper grease everything liberally before putting it back together.

	==S2==		===S2===

	~~MORE INFO TO BE ADDED SOON - Colbot51~~


	TOOLS:		===TOOLS===

	[[Image:oil.JPG\|thumb\|left\|Penitration Oil or WD40]]		[[Image:oil.JPG\|thumb\|left\|Penitration Oil or WD40]]
Line 76:		Line 75:


			===FITTING===

	New rubber exhaust mounts are a wise replacement as well		New rubber exhaust mounts are a wise replacement as well

Mr Wiki at 10:14, 22 January 2007

2007-01-22T10:14:00Z

← Older revision		Revision as of 10:14, 22 January 2007
Line 109:		Line 109:


	I forgot to take pictures / get my camera out when i was using a friends hydraulic ramp as it was a bit hectic, but i did take ~~two~~ with my camera phone, sorry		I forgot to take pictures / get my camera out when i was using a friends hydraulic ramp as it was a bit hectic, but i did take some with my camera phone, sorry

	[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]		[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]
	[[Image:exhaustoff.JPG\|thumb\|left\|Exhaust finnaly out]]		[[Image:exhaustoff.JPG\|thumb\|left\|Exhaust finnaly out]]
	{{clr}}		{{clr}}


	I would also like to say that on a scale of 1 to 10 ( 10 being a qualified mechanic). I am about a 2 (knowing little) and i think that changing the exhaust on the elise is easy, if you exclude the rusted/seized nuts that are more of a pain than a problem.		I would also like to say that on a scale of 1 to 10 ( 10 being a qualified mechanic). I am about a 2 (knowing little) and i think that changing the exhaust on the elise is easy, if you exclude the rusted/seized nuts that are more of a pain than a problem.

Mr Wiki at 12:44, 21 November 2006

2006-11-21T12:44:52Z

← Older revision		Revision as of 12:44, 21 November 2006
Line 116:		Line 116:

	I would also like to say that on a scale of 1 to 10 ( 10 being a qualified mechanic). I am about a 2 (knowing little) and i think that changing the exhaust on the elise is easy, if you exclude the rusted/seized nuts that are more of a pain than a problem.		I would also like to say that on a scale of 1 to 10 ( 10 being a qualified mechanic). I am about a 2 (knowing little) and i think that changing the exhaust on the elise is easy, if you exclude the rusted/seized nuts that are more of a pain than a problem.


			Also See http://www.elisenet.com/Exhaust.htm

	[[Category:Exhaust]]		[[Category:Exhaust]]
	[[Category:DIY]]		[[Category:DIY]]

← Older revision		Revision as of 10:32, 22 January 2007
Line 112:		Line 112:

	[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]		[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]
	[[Image:lamba.JPG\|thumb\|left\|~~Lamba~~ Sensor]]		[[Image:lamba.JPG\|thumb\|left\|Lambda Sensor]]
	[[Image:lamba2.JPG\|thumb\|left\|~~Lamba~~ Sensor]]		[[Image:lamba2.JPG\|thumb\|left\|Lambda Sensor]]
	[[Image:Flexi.JPG\|thumb\|left\|Flexi Section of the Sports Cat]]		[[Image:Flexi.JPG\|thumb\|left\|Flexi Section of the Sports Cat]]
	[[Image:sportscat.JPG\|thumb\|left\|Sports Cat Fitted]]		[[Image:sportscat.JPG\|thumb\|left\|Sports Cat Fitted]]

← Older revision		Revision as of 10:29, 22 January 2007
Line 112:		Line 112:

	[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]		[[Image:helpinghand.jpg\|thumb\|left\|Always good to have a friend, who is a 'grease monkey' near buy]]
			[[Image:lamba.JPG\|thumb\|left\|Lamba Sensor]]
			[[Image:lamba2.JPG\|thumb\|left\|Lamba Sensor]]
			[[Image:Flexi.JPG\|thumb\|left\|Flexi Section of the Sports Cat]]
			[[Image:sportscat.JPG\|thumb\|left\|Sports Cat Fitted]]
			[[Image:sportscat2.JPG\|thumb\|left\|Sports Cat Fitted]]
			[[Image:exhausthanger.JPG\|thumb\|left\|Elise Exhaust Mounts]]

	[[Image:exhaustoff.JPG\|thumb\|left\|Exhaust finnaly out]]		[[Image:exhaustoff.JPG\|thumb\|left\|Exhaust finnaly out]]
	{{clr}}		{{clr}}