Vehicle security system - Revision history

Lithopsian: /* Elise S2 After March 02 */ that would be much more understandable as a new paragraph

2025-05-14T19:14:35Z

Elise S2 After March 02: that would be much more understandable as a new paragraph

← Older revision		Revision as of 19:14, 14 May 2025
Line 125:		Line 125:
	i) Four minutes after switching off the ignition.		i) Four minutes after switching off the ignition.

	ii) One minute after switching off the ignition and opening either door. 8186 Alarm System: As an optional upgrade, the Elise may be specified factory built with a Cobra 8186 vehicle security system which incorporates the following features:		ii) One minute after switching off the ignition and opening either door.

			8186 Alarm System: As an optional upgrade, the Elise may be specified factory built with a Cobra 8186 vehicle security system which incorporates the following features:

	- Ingress protection using sensing switches on both doors, both front body access panels, and the engine cover.		- Ingress protection using sensing switches on both doors, both front body access panels, and the engine cover.

GaryDVO at 16:54, 1 March 2015

2015-03-01T16:54:35Z

← Older revision		Revision as of 16:54, 1 March 2015
Line 101:		Line 101:
	The transmitter fob with single button is incorporated into the head of the mechanical door key.		The transmitter fob with single button is incorporated into the head of the mechanical door key.
	Replacement transmitter/keys may be ordered either uncoded (if only a mechanical blade is required, into the head of which the original transmitter board may be transferred), or coded (if security code is supplied). New coded transmitters must then be programmed to the car by the owner using a button press sequence.		Replacement transmitter/keys may be ordered either uncoded (if only a mechanical blade is required, into the head of which the original transmitter board may be transferred), or coded (if security code is supplied). New coded transmitters must then be programmed to the car by the owner using a button press sequence.

			=== Elise S1 Cobra ====

			If you have no touch key and change the battery in the Fob use the procedure on the Youtube video, it works:

			https://www.youtube.com/watch?v=obFco5z3OA8

Steff: /* Elise Alarm Upgrage Option After Oct 97 */

2014-08-12T21:12:46Z

Elise Alarm Upgrage Option After Oct 97

← Older revision		Revision as of 21:12, 12 August 2014
Line 62:		Line 62:
	security touch key.		security touch key.



			What the manual doesn't mention is that if your fob doesn't work (after changing the battery for example), you don't necessarily have to go through that whole procedure. The S1 manual doesn't tell you this, but the simple sequence to resync the fob is as follows:

			1) Remove battery & wait 10 seconds before re-installing (re-sync can fail if this step is missed)
			2) Hold down both buttons (remote fob LED will light), holding down for approx.10 seconds until LED turns off.
			3) Release both buttons.
			4) Press large button for one second, LED will flash…re-sync complete

			I did this with two separate fobs last weekend and it worked a treat.

			NeilGC

	===340R Exige S1 and Elise S2 Before Feb 02===		===340R Exige S1 and Elise S2 Before Feb 02===

Lewtus at 14:55, 26 May 2012

2012-05-26T14:55:21Z

Lewtus at 14:53, 26 May 2012

2012-05-26T14:53:50Z

← Older revision		Revision as of 14:53, 26 May 2012
Line 180:		Line 180:

	pfk manual elise s2 alarm http://www.warp.at/liz/pfk457/D457520RV3.pdf		pfk manual elise s2 alarm http://www.warp.at/liz/pfk457/D457520RV3.pdf

			WORKS ON 2005 CAR

			REMOTE KEY FOB - PROGRAMMING - USE WHEN ADDING A NEW REMOTE INTO THE SYSTEM
			IGNITION MUST BE ON AND THE ALARM OFF
			STEP 1 – PREPARING ALL REMOTE KEY FOBS - ALL FOBS MUST BE DONE SIMULTANEOUSLY
			Press and hold both buttons on remote until the LED stops flashing (about 10 seconds).
			Do this for all remotes to be programmed
			The LED on the remote should stay on until after programming.
			If the LED on the remote extinguishes by the time you want to program, the key has gone into battery
			saving mode, press large button once to bring the LED back on then proceed with programming.

			STEP 2 – ENTER PIN
			1) Turn ignition ON and OFF 3 times within 5 seconds.
			2) Security LED will blink once indicating that the security code can now be entered.
			3) Enter security code as follows:
			.... a) Turn ignition ON & count number of blinks representing 1ST digit of code then turn ignition OFF.
			.... b) Repeat for 2nd digit.
			.... c) Repeat for 3rd digit.
			.... d) Repeat for 4th digit.
			4) Turn ignition ON and LED will come on permanently if correct code has been entered

			STEP 3 – COMPLETE THE REMOTE KEY FOB PROCEDURE
			1) Press and hold the large button on one of the remotes until the security LED light in the tachometer goes out then comes back on.
			2) Do this for each remaining remote
			3) Turn off the ignition and check each remote for the correct operation.

Eaa53 at 15:15, 1 January 2012

2012-01-01T15:15:22Z

← Older revision		Revision as of 15:15, 1 January 2012
Line 17:		Line 17:

	The trapezoidal transmitter fob has two buttons, one smooth and one embossed with a padlock symbol. Replacement transmitters are purchased uncoded, and are matched to the car by a Lotus dealer using a scanner tool.		The trapezoidal transmitter fob has two buttons, one smooth and one embossed with a padlock symbol. Replacement transmitters are purchased uncoded, and are matched to the car by a Lotus dealer using a scanner tool.








Line 171:		Line 177:

	To disable a lost or stolen transmitter from the system, use the above procedure to programme 6 transmitters, if necessary, repeatedly reprogramming the same transmitter if less than 6 programmed transmitters are to be used.		To disable a lost or stolen transmitter from the system, use the above procedure to programme 6 transmitters, if necessary, repeatedly reprogramming the same transmitter if less than 6 programmed transmitters are to be used.


			pfk manual elise s2 alarm http://www.warp.at/liz/pfk457/D457520RV3.pdf




	[[Category:Electrical]]		[[Category:Electrical]]

litton4 at 07:34, 15 July 2010

2010-07-15T07:34:39Z

← Older revision		Revision as of 07:34, 15 July 2010
Line 155:		Line 155:
	#After a number of flashes corresponding to the first digit of the PIN, turn on the ignition.<br>Note that the first flash may not be of full duration (but it is still to be counted) dependent on the waveform position at time of ignition switch off		#After a number of flashes corresponding to the first digit of the PIN, turn on the ignition.<br>Note that the first flash may not be of full duration (but it is still to be counted) dependent on the waveform position at time of ignition switch off
	#Turn off the ignition and after a number of flashes corresponding to the second digit of the PIN, turn on the ignition.<br>Repeat this process until all 5 digits have been completed. <br>Note that 10 flashes correspond to a zero digit		#Turn off the ignition and after a number of flashes corresponding to the second digit of the PIN, turn on the ignition.<br>Repeat this process until all 5 digits have been completed. <br>Note that 10 flashes correspond to a zero digit
	#If the PIN is entered correctly, the alarm will now be overridden and the engine mobilised.<br>However passive immobilisation will still occur after an ignition off time of 40 seconds, requiring a repeat of the above procedure to mobilise.<br>Passive arming and passive door locking cannot occur until a transmitter is used to operate the alarm.		#If the PIN is entered correctly, the alarm will sound a short beep and will now be overridden and the engine mobilised.<br>However passive immobilisation will still occur after an ignition off time of 40 seconds, requiring a repeat of the above procedure to mobilise.<br>Passive arming and passive door locking cannot occur until a transmitter is used to operate the alarm.

	If at any stage of the process, a number is entered incorrectly, the system will immediately revert to the start, so that the whole PIN must be re-entered.		If at any stage of the process, a number is entered incorrectly, the system will immediately revert to the start, so that the whole PIN must be re-entered.

paulc: /* Elise & Exige S2 2008? Onwards */

2010-06-15T21:51:10Z

Elise & Exige S2 2008? Onwards

← Older revision		Revision as of 21:51, 15 June 2010
Line 130:		Line 130:
	===Elise & Exige S2 2008? Onwards===		===Elise & Exige S2 2008? Onwards===

			[[Image:Transmitter_Key.gif\|thumb\|left]]
	These models have a single key fob that combines ignition key and alarm.		These models have a single key fob that combines ignition key and alarm.
	They are oval (think like an eye) in shape and have 3 buttons, one round with a Lotus logo and 2 flat black ones.		They are oval (think like an eye) in shape and have 3 buttons, one round with a Lotus logo and 2 flat black ones.
	~~[[Image:Transmitter_Key.gif]]~~		{{clr}}

	====Transmitter Key battery replacement====		====Transmitter Key battery replacement====

	The transmitter keys will normally operate within a range of 5 metres from the car, but this may be reduced by the presence of other radio signals in the vicinity. The transmitters are powered by a long life 3v lithium battery (type CR2032) which should last for 3 years. However, it is recommended to renew the batteries every 12 months		The transmitter keys will normally operate within a range of 5 metres from the car, but this may be reduced by the presence of other radio signals in the vicinity. The transmitters are powered by a long life 3v lithium battery (type CR2032) which should last for 3 years. However, it is recommended to renew the batteries every 12 months.
	[[Image:Transmitter_Battery_Replacement.gif]]
			[[Image:Transmitter_Battery_Replacement.gif\|thumb\|left]]
	# Using a small screwdriver, prise open the back panel of the key case using the slot by the keyring hole.		# Using a small screwdriver, prise open the back panel of the key case using the slot by the keyring hole.
	# Remove the old battery and wait for 10 seconds before inserting the new battery with the +ve sign uppermost and holding the battery only by the periphery		# Remove the old battery and wait for 10 seconds before inserting the new battery with the +ve sign uppermost and holding the battery only by the periphery
	# refit the back panel, pressing firmly to engage the clip.		# refit the back panel, pressing firmly to engage the clip.
	# the transmitter should now operate normally		# the transmitter should now operate normally
			{{clr}}

	====Emergency Disarming/mobilising====		====Emergency Disarming/mobilising====

litton4 at 21:13, 12 June 2010

2010-06-12T21:13:06Z

← Older revision		Revision as of 21:13, 12 June 2010
Line 132:		Line 132:
	These models have a single key fob that combines ignition key and alarm.		These models have a single key fob that combines ignition key and alarm.
	They are oval (think like an eye) in shape and have 3 buttons, one round with a Lotus logo and 2 flat black ones.		They are oval (think like an eye) in shape and have 3 buttons, one round with a Lotus logo and 2 flat black ones.
			[[Image:Transmitter_Key.gif]]

	====Transmitter Key battery replacement====		====Transmitter Key battery replacement====

litton4 at 21:12, 12 June 2010

2010-06-12T21:12:10Z

← Older revision		Revision as of 21:12, 12 June 2010
Line 136:		Line 136:

	The transmitter keys will normally operate within a range of 5 metres from the car, but this may be reduced by the presence of other radio signals in the vicinity. The transmitters are powered by a long life 3v lithium battery (type CR2032) which should last for 3 years. However, it is recommended to renew the batteries every 12 months		The transmitter keys will normally operate within a range of 5 metres from the car, but this may be reduced by the presence of other radio signals in the vicinity. The transmitters are powered by a long life 3v lithium battery (type CR2032) which should last for 3 years. However, it is recommended to renew the batteries every 12 months
			[[Image:Transmitter_Battery_Replacement.gif]]
	# Using a small screwdriver, prise open the back panel of the key case using the slot by the keyring hole.		# Using a small screwdriver, prise open the back panel of the key case using the slot by the keyring hole.
	# Remove the old battery and wait for 10 seconds before inserting the new battery with the +ve sign uppermost and holding the battery only by the periphery		# Remove the old battery and wait for 10 seconds before inserting the new battery with the +ve sign uppermost and holding the battery only by the periphery

← Older revision		Revision as of 14:55, 26 May 2012
Line 184:		Line 184:

	REMOTE KEY FOB - PROGRAMMING - USE WHEN ADDING A NEW REMOTE INTO THE SYSTEM		REMOTE KEY FOB - PROGRAMMING - USE WHEN ADDING A NEW REMOTE INTO THE SYSTEM

	IGNITION MUST BE ON AND THE ALARM OFF		IGNITION MUST BE ON AND THE ALARM OFF

	STEP 1 – PREPARING ALL REMOTE KEY FOBS - ALL FOBS MUST BE DONE SIMULTANEOUSLY		STEP 1 – PREPARING ALL REMOTE KEY FOBS - ALL FOBS MUST BE DONE SIMULTANEOUSLY

	Press and hold both buttons on remote until the LED stops flashing (about 10 seconds).		Press and hold both buttons on remote until the LED stops flashing (about 10 seconds).

	Do this for all remotes to be programmed		Do this for all remotes to be programmed

	The LED on the remote should stay on until after programming.		The LED on the remote should stay on until after programming.

	If the LED on the remote extinguishes by the time you want to program, the key has gone into battery		If the LED on the remote extinguishes by the time you want to program, the key has gone into battery
	saving mode, press large button once to bring the LED back on then proceed with programming.		saving mode, press large button once to bring the LED back on then proceed with programming.

	STEP 2 – ENTER PIN		STEP 2 – ENTER PIN

	1) Turn ignition ON and OFF 3 times within 5 seconds.		1) Turn ignition ON and OFF 3 times within 5 seconds.

	2) Security LED will blink once indicating that the security code can now be entered.		2) Security LED will blink once indicating that the security code can now be entered.

	3) Enter security code as follows:		3) Enter security code as follows:

	.... a) Turn ignition ON & count number of blinks representing 1ST digit of code then turn ignition OFF.		.... a) Turn ignition ON & count number of blinks representing 1ST digit of code then turn ignition OFF.

	.... b) Repeat for 2nd digit.		.... b) Repeat for 2nd digit.

	.... c) Repeat for 3rd digit.		.... c) Repeat for 3rd digit.

	.... d) Repeat for 4th digit.		.... d) Repeat for 4th digit.

	4) Turn ignition ON and LED will come on permanently if correct code has been entered		4) Turn ignition ON and LED will come on permanently if correct code has been entered

	STEP 3 – COMPLETE THE REMOTE KEY FOB PROCEDURE		STEP 3 – COMPLETE THE REMOTE KEY FOB PROCEDURE

	1) Press and hold the large button on one of the remotes until the security LED light in the tachometer goes out then comes back on.		1) Press and hold the large button on one of the remotes until the security LED light in the tachometer goes out then comes back on.

	2) Do this for each remaining remote		2) Do this for each remaining remote

	3) Turn off the ignition and check each remote for the correct operation.		3) Turn off the ignition and check each remote for the correct operation.