File:30. Tighteneing Lower Ball Joint.JPG: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

18 June 2006

  • curprev 09:0509:05, 18 June 2006 Andrew S talk contribs 312 bytes +312 Step 28. With the suspension under compression tighten the lower ball joint nut to 45NM. If you only have a basic tool kit you will not be able to use a 19mm socket and torque wrench because the hub carrier will be in the way, so you will need to estimate
Retrieved from "https://wiki.seloc.org/a/File:30._Tighteneing_Lower_Ball_Joint.JPG"