Difference between revisions of "Radiator"

From TechWiki
Jump to navigation Jump to search
(Seriously now sell Pro-Alloy rad)
 
(39 intermediate revisions by 9 users not shown)
Line 1: Line 1:
−
[[Image:All aluminium radiator.jpg|thumb|left|Eliseparts all aluminium radiator]]
+
[[Image:Standard oem radiator.jpg|thumb|right|Standard OEM radiator with plastic end tanks]]
−
The standard OEM Elise radiator is another weak point in the cooling system. Although it is lightweight, it has plastic end tanks which are prone to expanding and leaking under pressure.
+
[[Image:Oem rad end tank leak.jpg|thumb|right|Drivers side plastic end tank leaking under pressure]]
  
−
Unfortunately you need to [[remove the front clamshell]] before you can [[replace the radiator & cooling fans|replace the radiator]].
+
The standard OEM Elise radiator is another weak point in the cooling system.  Although it is lightweight, it has plastic end tanks which are prone to expanding and leaking under pressure (possible manufacture problem where the main core is bonded to the top/bottom - but no reference).  This is the most common fault and the first signs of failure are drops of coolant on the windscreen, either drivers or passengers side, but catastrophic failure of the end tanks has been known.
 +
 
 +
Unfortunately you need to [[Remove the front clamshell|Remove S2 front clamshell]] before you can [[replace the radiator & cooling fans|replace the radiator]].
  
 
A upgraded radiator is pretty advisable when going for Honda/Audi/Duratec engine upgrades.  Most converted cars on the original radiators seem to blow them up pretty soon after conversion.
 
A upgraded radiator is pretty advisable when going for Honda/Audi/Duratec engine upgrades.  Most converted cars on the original radiators seem to blow them up pretty soon after conversion.
−
{{clr}}
 
  
−
==Leaks==
+
==Aftermarket Upgrades==
−
[[Image:Oem rad end tank leak.jpg|thumb|left|Drivers side end tank leaking under pressure]]
+
There are basically three options available when it comes to after market radiators that will fit an Elise/Exige. All three are 'all aluminium' and none have the dreaded plastic end tanks.  There appears to be only two manufacturers that are making these radiators.  The 42mm single row is made by ??? and the 45mm twin row single pass is made by [[Pro Alloy]].  All on-line retailers sell the same radiators, they just badge them with different names to confuse you.  Hopefully the following table will help when making your choice for purchase:
−
The most common fault with the OEM radiator is cracking/spliting of the plastic end tanks.  The first signs of failure are drops of coolent on the windscreen, either drivers or passengers side, but castrophic failure of the end tanks has been known.
 
−
{{clr}}
 
  
−
Quite often the passenger side hose is poorly connected (because it is difficult to do) and sometimes the bleed screw can leak.  
+
{|border=1
 +
!On-line<br>Retailer
 +
!32mm Core/Single Row<br>Manufactured by ???
 +
!42mm Core/Single Row<br>Manufactured by ???
 +
!45mm Core/Twin Row<br>Manufactured by Pro Alloy
 +
|-
 +
|[http://www.eliseparts.com/ Eliseparts]
 +
|[http://www.eliseparts.com/products/show/84/221/aluminium-high-pressure-radiator/ ALUMINIUM HIGH PRESSURE RADIATOR]
 +
|Not available
 +
|[http://www.eliseparts.com/products/show/84/224/aluminium-upgraded-radiator/ ALUMINIUM UPGRADED RADIATOR]
 +
|-
 +
|[http://www.elise-shop.com/ Eliseshop]
 +
|Not available
 +
|[http://www.elise-shop.com/aluminium-high-pressure-extra-capacity-radiator-all-models-p-345.html Aluminium High Pressure extra capacity Radiator]
 +
|[http://www.elise-shop.com/pro-alloy-full-aluminium-race-radiator-elise-exige-vx220-p-961.html Pro Alloy Full Aluminium Race Radiator]
 +
|-
 +
|[http://www.proalloy.co.uk/ Pro Alloy]
 +
|Not applicable
 +
|Not applicable
 +
|[http://www.proalloy.co.uk/cgi-bin/sitewise.pl?act=det&pt=52_921_62_178&p=207&id=proalloy Alloy Race Radiator]
 +
|-
 +
|[http://www.hangar111.com/shop/ Hangar 111]
 +
|Not available
 +
|[http://www.hangar111.com/shop/lotus-2-eleven-engine-tuning-parts/204-2-eleven-elise-exige-340r-parts-alloy-radiator-standard-replacement.html PERFORMANCE RADIATOR - 42MM CORE]
 +
|[http://www.hangar111.com/shop/lotus-2-eleven-engine-tuning-parts/205-elise-exige-alloy-radiator-uprated-twin-core.html TRACK DAY/MOTORSPORT RADIATOR - 45MM CORE]
 +
|-
 +
|[http://www.seriouslylotus.com/ Seriously Lotus]
 +
|[https://www.seriouslylotus.com/radiator-high-pressure-32mm High Pressure 32mm]
 +
|[https://www.seriouslylotus.com/radiator-high-pressure-42mm Radiator High Pressure 42mm]
 +
|[https://www.seriouslylotus.com/pro-alloy-radiator-single-pass-45mm Pro-Alloy Radiator Single Pass 45mm]
 +
|}
  
−
The OEM radiators seem to have a problem with their manufacture where the main core is bonded to the top/bottom and leaks are all too common.
+
The radiator fitted by Lotus with the plastic end caps is a 32mm single core, single pass, manufactured by [http://www.pmagroup.co.uk/branches.php PMA Group].  The direct replacement for this radiator, maintaining the same coolant volume in the system, is in column one.  Columns two and three offer greater capacity.  Other variations are available but the above three will cater for 99.9% of people on road and trackdays.
  
−
===Indication of HGF===
+
The following video will help you understand some of the terms used in radiator speak, like twin rows, dual cores, triple pass etc:
−
Its been suggested in the past that a blown radiator can indicate imminent HGF. The header tank cap is normally the first to vent when the system is pressurised since it only requires approximately 1 bar. The radiator is designed to operate at pressures a lot higher than this and the cap acts as a fuse.  However, the header tank is on the lowest pressure point of the circuit and this allows high pressure peaks on the high pressure side (which is from the engine to the rad).  '''need more thought here'''
+
* http://www.youtube.com/watch?v=Ldfuzy_JJUo
  
−
==Aftermarket Upgrades==
 
−
===Eliseparts===
 
 
<gallery>
 
<gallery>
−
Image:All aluminium radiator.jpg|All aluminium upgraded radiator
+
Image:Standard oem radiator.jpg|Standard OEM 32mm core, single row, single pass, with plastic end tanks
−
Image:All aluminium hi pressure radiator.jpg|All aluminium hi pressure radiator
+
Image:All aluminium hi pressure radiator.jpg|32mm core, single row, single pass
−
Image:Standard oem radiator.jpg|Standard OEM radiator with plastic end tanks
+
Image:ep_32_1row.jpg|Failing 32mm core, single row, single pass
 +
Image:es_42_srsp.jpg|42mm core, single row, single pass
 +
Image:pro_alloy_45_2row.jpg|Pro Alloy 45mm core, twin rwo, single pass
 
</gallery>
 
</gallery>
−
[http://www.eliseparts.com Eliseparts] offer three radiators, the standard OEM with plastic end tanks, an all aluminium alternative and a race radiator.
 
  
−
===Proalloy===
+
===Triple Pass===
−
<gallery>Image:Radiator pro alloy.jpg|Pro Alloy direct replacement radiator</gallery>
+
The triple pass radiators are only intended for motorsports and are '''not recommended for road use'''. The reason being there is not enough coolant flow at idle (sitting in traffic) to force the coolant through three passes of the radiator.  Road users who have fitted triple-pass radiators have resulted in increased engine temps.  This advice holds for heavy trackday heros that drive their cars to/from circuit; the car is still liable to be stationary in traffic.
  
−
[http://www.proalloy.co.uk Pro Alloy], Run by SELOC member [http://forums.seloc.org/member.php?action=viewpro&member=wazzer Wayne Clayden] offer a direct replacement for the standard unit: -
+
{|border=1
−
*Twin row 45mm thick, high efficiency alloy core.
+
!Manufacture
−
*Aluminium end tanks,(good for high pressure systems)
+
!Model
−
*All Pro Alloy radiator cores are fully brazed in a controlled atmosphere process to comply with ISO 9001 quality assurance standards
+
!Retailer(s)
 +
!Notes
 +
|-
 +
|ProAlloy
 +
|[http://www.proalloy.co.uk/cgi-bin/sitewise.pl?act=det&pt=&p=895&id=proalloy 42mm Core / Single Row / Triple Pass]
 +
|[http://www.eliseparts.com/products/show/84/1190/triple-pass-radiator/ EliseParts] <br> [http://www.elise-shop.com/aluminium-triple-pass-race-radiator-all-models-p-354077.html Elise Shop] <br> [https://www.seriouslylotus.com/radiator-tripple-pass-42mm Seriously Lotus]
 +
|
 +
|-
 +
|ProAlloy
 +
|[http://www.proalloy.co.uk/cgi-bin/sitewise.pl?act=det&pt=&p=895&id=proalloy 45mm Core / Twin Row / Triple Pass]
 +
|[http://www.hangar111.com/shop/lotus-2-eleven-engine-tuning-parts/571-elise-exige-2-eleven-triple-pass-alloy-radiator.html Hangar111] <br> [http://www.eliseparts.com/products/show/84/1190/triple-pass-radiator/ Elise Parts] <br> [http://www.seriouslylotus.com/pro-alloy-triple-pass-radiator Seriously Lotus]
 +
|
 +
|-
 +
|Unknown
 +
|50mm Core / Twin Row / Triple Pass
 +
|[http://www.seriouslylotus.com/triple-pass-twin-core-50mm-race-radiator Seriously Lotus]
 +
|
 +
|-
 +
|Koyorad Racing
 +
|[http://koyoradracing.com/news.asp?m=8&y=2016 48mm Core / Twin Row / Triple Pass <br> P/N# HH652890N]
 +
|[https://www.amazon.com/Koyorad-HH652890N-Radiator-for-Lotus/dp/B01KIC7M6Y Amazon] <br> [http://www.optionsauto.com/products.asp?dept=14600 Options Auto]
 +
|
 +
|-
 +
|Denso F1(bespoke)
 +
|27mm Core / unknown / unknown
 +
|[http://www.blackwatchracing.com/product-p/1215.htm Blackwatch Racing]
 +
|21 fins / inch, .25 tube spacing, 2.5lbs empty
 +
|-
 +
|}
 +
"bespoke" denotes limited supply radiators specially created by race shops / tuners for high-performance cooling
  
−
===Elise-Shop.com===
+
==Indication of HGF==
−
<gallery>
+
Its been suggested in the past that a blown radiator can indicate imminent HGF. The header tank cap is normally the first to vent when the system is pressurised since it only requires approximately 1 bar. The radiator is designed to operate at pressures a lot higher than this and the cap acts as a fuse. However, the header tank is on the lowest pressure point of the circuit and this allows high pressure peaks on the high pressure side (which is from the engine to the rad). Therefore it would be prudent to have a petrochemical test (sniff test) performed on the coolant fluid if the radiator fails to rule out possible HGF.
−
Image:http://www.elise-shop.com/images/OE-RAD.jpg|Original OE radiator with plastic end tanks
 
−
Image:http://www.elise-shop.com/images/AliRad.jpg|Full Aluminium High Pressure Radiator (Elise, Exige, 340R, VX220 - non VVTi)
 
−
</gallery>
 
−
[http://www.elise-shop.com Elise-Shop.com] offer two radiators, the standard OEM with plastic end tanks and a Full aluminium alternative.
 
  
 
[[Category:Engine Cooling]]
 
[[Category:Engine Cooling]]
 +
[[Category:Lotus Elise]]
 +
[[Category:S1]]
 +
[[Category:S2]]

Latest revision as of 22:11, 5 February 2017

Standard OEM radiator with plastic end tanks
Drivers side plastic end tank leaking under pressure

The standard OEM Elise radiator is another weak point in the cooling system. Although it is lightweight, it has plastic end tanks which are prone to expanding and leaking under pressure (possible manufacture problem where the main core is bonded to the top/bottom - but no reference). This is the most common fault and the first signs of failure are drops of coolant on the windscreen, either drivers or passengers side, but catastrophic failure of the end tanks has been known.

Unfortunately you need to Remove S2 front clamshell before you can replace the radiator.

A upgraded radiator is pretty advisable when going for Honda/Audi/Duratec engine upgrades. Most converted cars on the original radiators seem to blow them up pretty soon after conversion.

Aftermarket Upgrades

There are basically three options available when it comes to after market radiators that will fit an Elise/Exige. All three are 'all aluminium' and none have the dreaded plastic end tanks. There appears to be only two manufacturers that are making these radiators. The 42mm single row is made by ??? and the 45mm twin row single pass is made by Pro Alloy. All on-line retailers sell the same radiators, they just badge them with different names to confuse you. Hopefully the following table will help when making your choice for purchase:

On-line
Retailer 		32mm Core/Single Row
Manufactured by ??? 		42mm Core/Single Row
Manufactured by ??? 		45mm Core/Twin Row
Manufactured by Pro Alloy
Eliseparts ALUMINIUM HIGH PRESSURE RADIATOR Not available ALUMINIUM UPGRADED RADIATOR
Eliseshop Not available Aluminium High Pressure extra capacity Radiator Pro Alloy Full Aluminium Race Radiator
Pro Alloy Not applicable Not applicable Alloy Race Radiator
Hangar 111 Not available PERFORMANCE RADIATOR - 42MM CORE TRACK DAY/MOTORSPORT RADIATOR - 45MM CORE
Seriously Lotus High Pressure 32mm Radiator High Pressure 42mm Pro-Alloy Radiator Single Pass 45mm

The radiator fitted by Lotus with the plastic end caps is a 32mm single core, single pass, manufactured by PMA Group. The direct replacement for this radiator, maintaining the same coolant volume in the system, is in column one. Columns two and three offer greater capacity. Other variations are available but the above three will cater for 99.9% of people on road and trackdays.

The following video will help you understand some of the terms used in radiator speak, like twin rows, dual cores, triple pass etc:

  • Standard OEM 32mm core, single row, single pass, with plastic end tanks

  • 32mm core, single row, single pass

  • Failing 32mm core, single row, single pass

  • 42mm core, single row, single pass

  • Pro Alloy 45mm core, twin rwo, single pass

Triple Pass

The triple pass radiators are only intended for motorsports and are not recommended for road use. The reason being there is not enough coolant flow at idle (sitting in traffic) to force the coolant through three passes of the radiator. Road users who have fitted triple-pass radiators have resulted in increased engine temps. This advice holds for heavy trackday heros that drive their cars to/from circuit; the car is still liable to be stationary in traffic.

Manufacture Model Retailer(s) Notes
ProAlloy 42mm Core / Single Row / Triple Pass EliseParts
Elise Shop
Seriously Lotus
ProAlloy 45mm Core / Twin Row / Triple Pass Hangar111
Elise Parts
Seriously Lotus
Unknown 50mm Core / Twin Row / Triple Pass Seriously Lotus
Koyorad Racing 48mm Core / Twin Row / Triple Pass
P/N# HH652890N 		Amazon
Options Auto
Denso F1(bespoke) 27mm Core / unknown / unknown Blackwatch Racing 21 fins / inch, .25 tube spacing, 2.5lbs empty

"bespoke" denotes limited supply radiators specially created by race shops / tuners for high-performance cooling

Indication of HGF

Its been suggested in the past that a blown radiator can indicate imminent HGF. The header tank cap is normally the first to vent when the system is pressurised since it only requires approximately 1 bar. The radiator is designed to operate at pressures a lot higher than this and the cap acts as a fuse. However, the header tank is on the lowest pressure point of the circuit and this allows high pressure peaks on the high pressure side (which is from the engine to the rad). Therefore it would be prudent to have a petrochemical test (sniff test) performed on the coolant fluid if the radiator fails to rule out possible HGF.

Retrieved from ‘https://wiki.seloc.org/index.php?title=Radiator&oldid=12089’