Remove the undertray: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
Lithopsian (talk | contribs) the front undertray is a smaller rectangular tray at the well ... front of the car - remove comments that actually apply to the front undertray |
||
| (7 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{Infobox Timetools | |||
|time = 5mins | |||
|tools = 8mm Socket | |||
}} | |||
[[Image:Remove the front undertray step 4.jpg|thumb|left|Topside of front undertray from Elise S2]] | [[Image:Remove the front undertray step 4.jpg|thumb|left|Topside of front undertray from Elise S2]] | ||
{{clr}} | {{clr}} | ||
| Line 12: | Line 14: | ||
Image:Remove the front undertray step 4.jpg|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car | Image:Remove the front undertray step 4.jpg|Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car | ||
</gallery> | </gallery> | ||
== Refitting == | == Refitting == | ||
Not easy to refit | Not easy to refit without positioning yourself under the car. | ||
# From below, slide the undertray inside the clamshell. | # From below, slide the undertray inside the clamshell. | ||
| Line 22: | Line 22: | ||
# Key the rear of the undertray into the lip. | # Key the rear of the undertray into the lip. | ||
# Replace all 12 screws. | # Replace all 12 screws. | ||
#* The rear three screws are secured with [http://www.loctite.com/int_henkel/loctite_uk/index.cfm Loctite]. | |||
[[Category:DIY]] | |||
[[Category:Body]] | |||
[[Category:Lotus Elise]] | |||
[[Category:S2]] | |||
Latest revision as of 17:58, 5 March 2023
| Time & Tools | |
| Time: | 5mins |
|---|---|
| Tools: | 8mm Socket |
Procedure
[edit | edit source]-
Remove the three screws (8mm socket) securing the undertray to the front clamshell -
This shows the rear lip securing the undertray. -
Remove the nine screws (8mm socket) securing the undertray to the chassis -
Now slide the undertray forward, so the rear edge drops out of the lip, and then backwards to remove from the car
Refitting
[edit | edit source]Not easy to refit without positioning yourself under the car.
- From below, slide the undertray inside the clamshell.
- Make sure it's the right way up!
- Key the rear of the undertray into the lip.
- Replace all 12 screws.
- The rear three screws are secured with Loctite.