Difference between revisions of "File:10. Lower Ball Joint Split From Hub Carrier.JPG"

From TechWiki
Jump to navigation Jump to search
(Step 9. When the ball joint is split from the hub carrier move carrier out of the way. You could use a trolley jack handle as a prop for the hub carrier under the track rod end bolt. Remove the ball joint rubber dust cover.)
 
(No difference)

Latest revision as of 08:52, 18 June 2006

Step 9. When the ball joint is split from the hub carrier move carrier out of the way. You could use a trolley jack handle as a prop for the hub carrier under the track rod end bolt.

Remove the ball joint rubber dust cover.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current08:52, 18 June 2006Thumbnail for version as of 08:52, 18 June 2006600 × 450 (46 KB)Andrew S (talk | contribs)Step 9. When the ball joint is split from the hub carrier move carrier out of the way. You could use a trolley jack handle as a prop for the hub carrier under the track rod end bolt. Remove the ball joint rubber dust cover.

You cannot overwrite this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from ‘https://wiki.seloc.org/index.php?title=File:10._Lower_Ball_Joint_Split_From_Hub_Carrier.JPG&oldid=1737’