Difference between revisions of "Headlight Switch Panel"
Jump to navigation
Jump to search
m |
(Convention in wikis is only to link first occurence of a term) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 7: | Line 7: | ||
# Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires | # Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires | ||
# Remove the plastic surrounding the heater controls in the same way as in step 1 | # Remove the plastic surrounding the heater controls in the same way as in step 1 | ||
| − | # Unbolt the | + | # Unbolt the Stack instrument panel using a 10mm socket set. |
# The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off. | # The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off. | ||
# The switch connectors just pull off the switch bodies. | # The switch connectors just pull off the switch bodies. | ||
| Line 17: | Line 17: | ||
[[Category:Lotus Elise]] | [[Category:Lotus Elise]] | ||
[[Category:S2]] | [[Category:S2]] | ||
| + | [[Category:S1]] | ||
| + | [[Category:Electrical]] | ||
Latest revision as of 21:21, 3 September 2007
The Headlight Switch Panel in an Elise is situated next to the stack/steering wheel on the dashboard.
Removal
- Remove the plastic surrounding the switches. This can be done using a couple of credit cards wedged into the top and lever the top down.
- Remove the aluminium panel which the lights are attached to. This has 2 screws at the top and 2 screws on the face. If they are hidden behind the black adhesive sticker, then puncture a hole through the sticker.
- Unscrew the bottom of the plastic steering column surround. This has 3 screws at the bottom and one at either side, plus two at the front. Let it dangle on the two wires
- Remove the plastic surrounding the heater controls in the same way as in step 1
- Unbolt the Stack instrument panel using a 10mm socket set.
- The painted aluminium panel above the switch panel should slide towards the steering column. It is held on using a sprung piece of metal, so should just it pull off.
- The switch connectors just pull off the switch bodies.
There's a lot of unscrewing there - so if you're lucky to have long wires some of the steps can be omitted.