Difference between revisions of "VVC Information"
hbaumhardt (talk | contribs) |
hbaumhardt (talk | contribs) |
||
| Line 20: | Line 20: | ||
{| border=1 cellpadding=5 align=center | {| border=1 cellpadding=5 align=center | ||
| K4 Pin || Wire || Function | | | K4 Pin || Wire || Function | | ||
| + | |- | ||
| 06 || Blue || VVC Oil Temp Earth | | | 06 || Blue || VVC Oil Temp Earth | | ||
| + | |- | ||
| 10 || Green Orange || VVC Oil Temp Signal | | | 10 || Green Orange || VVC Oil Temp Signal | | ||
| + | |- | ||
| 12 || Black Yellow || VVC Decriment | | | 12 || Black Yellow || VVC Decriment | | ||
| + | |- | ||
| 49 || Brown Black || VVC Increment |} | | 49 || Brown Black || VVC Increment |} | ||
Revision as of 19:58, 5 May 2009
The S1 EU2 VVC is controlled by the Lucas MEMS 2J ECU common with the early VVC MGFs
The S2 EU3 VVC is controlled by the Lotus K4 ECU (based on the Lucas MEMS 3)
VVC Failure Modes
ECT Sensor Error Limits to 6K RPM
MAP Sensor Error limits to 6K RPM
VVC Solenoid low resistance (should be 6.6 to 8.8 Ohms)Limits to 5.5K RPM
Cam Position Sensor Limits to 5.5K RPM
Note: Connecting the battery on wrong polarity can blow the ECU VVC control circut, as can running with a low resistance solenoid. Clearly the circuit has no protection.
Lotus S2 K4 ECU VVC Connections
| K4 Pin | Wire | |||||||||||||||||||||
| 06 | Blue | |||||||||||||||||||||
| 10 | Green Orange | |||||||||||||||||||||
| 12 | Black Yellow | |||||||||||||||||||||
| 49 | Brown Black | }
Lotus S2 K4 ECU VVC DTC Codes |
Code | P1336 | P1480 | P1481 | P1490 | P1491 | P1492 | P1493 | P1494 | P1495 |
External ResourcesVVC Sensors * http://homepage.swissonline.ch/TomsSeven/Navigation2/Map.htm VVC Sensors * http://www.mgfcar.de/sensor/index.htm VVC MEMS 2J Description * http://www.mgfcar.de/library/ENGINE_MANAGEMENT_SYSTEM_VVC_MEMS_2J.htm VVC Mechanism Assembly * http://www.davebence.co.uk/mods_10.htm VVC Timing * http://forums.mg-rover.org/showthread.php?p=1940938 |