Difference between revisions of "Misfire"
| Line 9: | Line 9: | ||
'''Items that can cause a misfire:''' | '''Items that can cause a misfire:''' | ||
| + | ===Loose/disconnected HT Leads=== | ||
| + | Check they are all attached properly! (Cured my misfire anyway....) | ||
| + | |||
| + | ===Moisture in Distributor (Dizzy) Cap=== | ||
| + | |||
| + | Unscrew, check for moisture, dry off. | ||
===Spark Plugs=== | ===Spark Plugs=== | ||
| Line 19: | Line 25: | ||
[[Coil packs]] | [[Coil packs]] | ||
| − | ===Throttle Position | + | ===Throttle Position Sensor=== |
[[Throttle Position Sensor]] | [[Throttle Position Sensor]] | ||
Latest revision as of 18:10, 5 September 2011
Misfire
Steady Misfire
In the case of a steady misfire, isolating the misfiring cylinder is the first step in diagnosing the problem.
Items that can cause a misfire:
Loose/disconnected HT Leads
Check they are all attached properly! (Cured my misfire anyway....)
Moisture in Distributor (Dizzy) Cap
Unscrew, check for moisture, dry off.
Spark Plugs
Coil Packs
Throttle Position Sensor
Lambda Sensor
Head Gasket Failure
A spark plug that shows heavy whitish to brown deposits may indicate a coolant leak either past the head gasket or through a crack in the combustion chamber. This type of problem will only get worse and may soon lead to even greater problems if the leak isn't fixed. Coolant makes a lousy lubricant and can cause ring, cylinder and bearing damage if it gets into a cylinder or the crankcase.
Inlet Manifold Gasket Failure
The Inlet manifold gasket can fail and allow air leaks and coolant/anti-freeze to leak into the cylinder ahead of the injectors. Tell tale signs can include rusty spark plugs on cylinder 1 and 4, sometimes even all four, lumpy idle or misfiring, high emissions, jerky acceleration and deceleration when coming off the accelerator, anti-freeze around the inlet manifold, unburnt fuel and possibly destroyed catalytic convertor.