Difference between revisions of "File:07resistorchange.jpg"
m |
m |
||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
− | Resistor pack is attached with two screws (one you cant get at without removing the wiring). You might need new to cut the wiring from the existing mass of molten/corroded connectors and attach new red female crimps. You might be able to salvage the existing shrouded female crimps if you simply cut/snap off the entire male connector from the old resistor pack, soak the crimp in plusgas/wd40 and then extract the remains of the male connector with snipe nose pliers. Once replaced rewire as shown. | + | Resistor pack is attached with two screws (one you cant get at without removing the wiring). You might need new to cut the wiring from the existing mass of molten/corroded connectors and attach new red female crimps. You might be able to salvage the existing shrouded female crimps if you simply cut/snap off the entire male connector from the old resistor pack, soak the crimp in plusgas/wd40 and then extract the remains of the male connector with snipe nose pliers. Once replaced rewire as shown. For additional peace of mind, consider a liberal application of grease over the connectors to prevent/delay future corrosion. |
Latest revision as of 15:28, 24 August 2009
Resistor pack is attached with two screws (one you cant get at without removing the wiring). You might need new to cut the wiring from the existing mass of molten/corroded connectors and attach new red female crimps. You might be able to salvage the existing shrouded female crimps if you simply cut/snap off the entire male connector from the old resistor pack, soak the crimp in plusgas/wd40 and then extract the remains of the male connector with snipe nose pliers. Once replaced rewire as shown. For additional peace of mind, consider a liberal application of grease over the connectors to prevent/delay future corrosion.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 22:29, 21 December 2008 | 500 × 375 (42 KB) | moetmoet (talk | contribs) | resistor pack has two screws. once replaced rewire as shown, will probably need new red spade connectors. | |
22:12, 21 December 2008 | 2,816 × 2,112 (147 KB) | moetmoet (talk | contribs) | resistor pack has two screws. once replaced rewire as shown, will probably need new red spade connectors. | ||
22:10, 21 December 2008 | 2,816 × 2,112 (317 KB) | moetmoet (talk | contribs) | resistor pack has two screws. once replaced rewire as shown, will probably need new red spade connectors. |
You cannot overwrite this file.
File usage
The following page links to this file: