Difference between revisions of "2-Pot AP Racing Caliper"
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
[[Category:S1]] | [[Category:S1]] | ||
[[Category:S2]] | [[Category:S2]] | ||
| + | |||
| + | Correct AP seal kit is CP4518-L | ||
Revision as of 13:22, 21 April 2021
Torque specs and bolt info for the cross-caliper bolts that hold the 2 halves together:
Elise 2-pot caliper Part # CP5119 type
Bolts
- M10x1.50 pitch x 55mm long (x2)
- M10x1.50 pitch x 70mm long (x2)
Bridge bolt torque = 58Nm (NOTE! THIS IS FOR THE CROSS-BOLTS, NOT THE caliper-to-upright bolts! Those are 45Nm)
Bolts need to be correct length of thread and plain shank, in Cap head, Hi tensile grade 12.9.
Information obtained from AP Racing by Steve 111s on SELOC. Thread HERE
Correct AP seal kit is CP4518-L