Difference between revisions of "Headlamp seals"
Jump to navigation
Jump to search
| Line 3: | Line 3: | ||
==S1== | ==S1== | ||
| − | The headlamp seals are available from Lotus | + | The headlamp seals are available from Lotus, but they are a bit pricy: |
| + | |||
| + | {| border="1" | ||
| + | || A111U0166K ||Headlamp seal||£12.50 (Sept 08) | ||
| + | |} | ||
| + | |||
The seals are made of lengths of 10mm diamater solid neoprene pipeing, superglued end to end | The seals are made of lengths of 10mm diamater solid neoprene pipeing, superglued end to end | ||
| Line 15: | Line 20: | ||
http://www.woolies-trim.co.uk/c-131-piping.aspx | http://www.woolies-trim.co.uk/c-131-piping.aspx | ||
| − | You can remove the headlamp shells without removing the wheel on an S1 | + | You can remove the headlamp shells to replace the seals without removing the wheel on an S1 - |
| − | + | provided the bulbs are removed and you have standard ride hight shocks. | |
| − | |||
| − | |||
| − | |||
Revision as of 23:09, 13 October 2008
Headlamp seals
S1
The headlamp seals are available from Lotus, but they are a bit pricy:
| A111U0166K | Headlamp seal | £12.50 (Sept 08) |
The seals are made of lengths of 10mm diamater solid neoprene pipeing, superglued end to end
to make a giant O-ring.
The internal diameter of this ring should be 133mm, this will then be slightly tensioned on the lip of the headlamp shell which is 143mm in diameter.
The raw material for these is available here
http://www.woolies-trim.co.uk/c-131-piping.aspx
You can remove the headlamp shells to replace the seals without removing the wheel on an S1 - provided the bulbs are removed and you have standard ride hight shocks.