Difference between revisions of "Emerald"
m (→External links) |
|||
| Line 20: | Line 20: | ||
The link below provides extra guidance on setting up the Emerald K3 ECU. Provided by user 'ptp170' | The link below provides extra guidance on setting up the Emerald K3 ECU. Provided by user 'ptp170' | ||
| − | + | UPDATES: | |
| + | |||
| + | 6th June 09: Includes basemaps + USB>RS232 Adaptor information | ||
* http://lotus.chriskelsall.co.uk/emerald.asp | * http://lotus.chriskelsall.co.uk/emerald.asp | ||
| + | |||
| + | |||
| + | 8th June 09: Included wiring information for IACV's on the S2 | ||
[[Category:Suppliers]] | [[Category:Suppliers]] | ||
Revision as of 13:49, 8 June 2009
Manufacturer of aftermarket ECUs
General Information
S1
The Emerald is plug and play with non VCC MEMS cars.
S2 (K-series)
No commercial adaptor loom is available at the moment. Emerald are working on a 'solution' at the moment but it is as of yet not ready. So basically the loom needs to be chopped and the new emerald plug wired onto the end. Also, the standard S2 IACV (Idle Air Control Valve) will NOT work with the Emerald (the ECU can't drive it). If you require the IACV then you'll need one from an S1, these are available from Eliseparts.
External links
The link below provides extra guidance on setting up the Emerald K3 ECU. Provided by user 'ptp170'
UPDATES:
6th June 09: Includes basemaps + USB>RS232 Adaptor information
8th June 09: Included wiring information for IACV's on the S2