Difference between revisions of "Remove the gear knob"
| Line 21: | Line 21: | ||
6. Replace knob in the opposite fashion to which you removed it. | 6. Replace knob in the opposite fashion to which you removed it. | ||
| + | |||
| + | == Rover Engine == | ||
| + | |||
| + | Enter procedure here. | ||
Revision as of 10:18, 28 July 2010
Toyota Engine
Lotus stick their gear knobs on with Loctite, or something similar, as they are pretty diffucult to get off. Brute force is normally needed, but it does help to know which way to turn it. On my 111R it was very, VERY difficult to turn. Obviously the longer the bar/allen key you use, the more leverage you get, and you need a lot!
Required tools:
- 2.5mm Allen Key
- Larger Allen Key / bar to fit in grub hole (for leverage)
- Beer
1. Using a 2.5mm allen key, remove the grub screw on the front side (the side closest to "R, 1st, 3rd & 5th").
2. Get prepared for swearing, grunting, anger.
3. Using a larger allen key, or similar size 'bar' for extra leverage in the grub screw hold, turn the knob anti-clockwise (as looking from the top).
4. Once removed, reward oneself with beer.
5. Do what you wanted to do with the knob: clean it, polish it, put a new gear gaiter on etc.
6. Replace knob in the opposite fashion to which you removed it.
Rover Engine
Enter procedure here.