Difference between revisions of "Alternator"
Jump to navigation
Jump to search
| Line 20: | Line 20: | ||
'C' on the diagram is the tensioner of the belt, loosen this to remove the belt. | 'C' on the diagram is the tensioner of the belt, loosen this to remove the belt. | ||
| − | Tension belt to the following: | + | Tension belt to the following on S2: |
For heater cars - one way deflection of 6-8mm under moderate finger pressure | For heater cars - one way deflection of 6-8mm under moderate finger pressure | ||
For AC cars - as previous but 9-10mm | For AC cars - as previous but 9-10mm | ||
Revision as of 17:26, 14 April 2007
Alternator
Please add your Info, Just click EDIT
Alternator replacement
Please add your Info, Just click EDIT
Alternator belt
You can change the alternator belt buy taking off the rear drivers side alloy and mud guard, removing the undertray will give no advantage, you will just need a good socket set.
Loosen 'A' pivot bolt and 'B' tensioner bolt, to allow the alternator to 'swing'
'C' on the diagram is the tensioner of the belt, loosen this to remove the belt.
Tension belt to the following on S2: For heater cars - one way deflection of 6-8mm under moderate finger pressure For AC cars - as previous but 9-10mm
Please add your Info, Just click EDIT
Alternator Heat Protection
Please add your Info, Just click EDIT