Difference between revisions of "Normal running temperature"
| Line 7: | Line 7: | ||
|- | |- | ||
| S2 111S || 1.8 Rover 'K' || Eliseparts Hi-Pressure Alu rad || 85-86 | | S2 111S || 1.8 Rover 'K' || Eliseparts Hi-Pressure Alu rad || 85-86 | ||
| + | |- | ||
| + | | S2 111S || 1.8 Rover 'K' || PRT with PEL500150 || 84-85 | ||
|- | |- | ||
| S1 || 1.8 Rover 'K' || Rover PRT 82° stat || 80-81 | | S1 || 1.8 Rover 'K' || Rover PRT 82° stat || 80-81 | ||
Revision as of 15:08, 16 May 2007
Listed below are temperature ranges from by SELOC members from their stack display within the car.
| Model | Engine | Modifications from Standard | Motorway (70mph) type crusing range (deg C) |
|---|---|---|---|
| S2 111S | 1.8 Rover 'K' | 89-91 | |
| S2 111S | 1.8 Rover 'K' | Eliseparts Hi-Pressure Alu rad | 85-86 |
| S2 111S | 1.8 Rover 'K' | PRT with PEL500150 | 84-85 |
| S1 | 1.8 Rover 'K' | Rover PRT 82° stat | 80-81 |
Fan
The service manual states the fans at the front should automatically switch on when the coolant temperature rises above 100°C. The temperature should then fall and the fan switches when the temperature drops below 90°C.
Temperature senders
The S1 has two temperature senders: brown (sends to ECU), blue (sends to dash). The blue temperature sender is notoriously unreliable and often fails, resulting in temperature readings approx 10°C lower than reality. The blue sender is also a "single wire" type which is affected by electrical load. In most cases, a 1°C rise in temperature can be seen when turning on each item of electrical equipment, e.g. headlights, heater fan, windscreen wipers.
The S2 (Rover engine) has a single (black) temperature sender for both ECU and dash.
The S2 (Toyota engine) has ???