2-Pot AP Racing Caliper

From TechWiki
Revision as of 19:46, 6 November 2023 by Ta264 (talk | contribs) (Note the threaded length of the bolts and that it follows the standard)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Torque specs and bolt info for the cross-caliper bolts that hold the 2 halves together:

Elise 2-pot caliper Part # CP5119 type

Bolts

  • M10x1.50 pitch x 55mm long (x2)
  • M10x1.50 pitch x 70mm long (x2)

Bridge bolt torque = 58Nm (NOTE! THIS IS FOR THE CROSS-BOLTS, NOT THE caliper-to-upright bolts! Those are 45Nm)

Bolts need to be correct length of thread (32mm for both, following DIN 912) and plain shank, in Cap head, Hi tensile grade 12.9.

Information obtained from AP Racing by Steve 111s on SELOC. Thread HERE

Caliper CP6126 Correct AP seal kit is CP4518-L

Retrieved from ‘https://wiki.seloc.org/index.php?title=2-Pot_AP_Racing_Caliper&oldid=13656’