Fit a front splitter

Front splitter

Fitting a front splitter to the front of your car couldn't be easier.

Procedure

There are two ways to secure the splitter to the front clamshell.

Glue

• Sikaflex

Bolts

20/25mm spreader washers

Incorrect fitment

Make sure you use large spreader washers

Unfortunately, if not correctly fitted, the splitter can part company with your car at high speeds. At best this will damage the splitter, at worse, your front clamshell. Remember it needs to sustain around 40 Kg of down force.

Removal

If you want to remove the splitter you can use a sharp (Stanley) blade to cut the seal and it comes off relatively easily.