All public logs
Jump to navigation
Jump to search
Combined display of all available logs of TechWiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 09:50, 18 June 2006 Andrew S talk contribs uploaded File:8. Removing Lower Ball Joint Nut.JPG (Step 7. Remove the ball joint nut . Use a 19mm ring/open ended spanner for the lower ball joint. You need to start with the ring end and transfer to the open end after winding the nut half the way up, otherwise the ring spanner will get stuck between the)
- 09:50, 18 June 2006 Andrew S talk contribs uploaded File:7. Securing Front Brake Caliper.JPG (Step 6. Secure the brake caliper so that it does not get in the way of removing the ball joint. Ensure that the brake line is not under strain and taking the weight of the caliper. You may wish to use a cable tie to secure the caliper out of the way. )
- 09:49, 18 June 2006 Andrew S talk contribs uploaded File:6. Removing Front Brake Caliper.JPG (Step 5. Remove the brake caliper using an 8mm hex driver or allen key.)
- 09:48, 18 June 2006 Andrew S talk contribs uploaded File:5. Removing Brake Pipe Clamp.JPG (Step 4. Remove the brake pipe clamp. )
- 09:48, 18 June 2006 Andrew S talk contribs uploaded File:4. Road Wheel Removed.JPG (Step 3. Jack up the car on the front jacking point using a trolley jack and remove the front road wheel. )
- 09:42, 18 June 2006 Andrew S talk contribs uploaded File:3. Loosening Road Wheel Bolts.JPG (Step 2. Loosen the bolts on the road wheel )
- 09:40, 18 June 2006 Andrew S talk contribs uploaded File:2. Measuring Lower Wishbone Height.JPG (How to change a Ball Joint and a Damper This procedure details how to change the offside lower front ball joint and damper assembly. The nearside front is an identical procedure and the upper front ball joints follow a similar procedure. The rear ball j)