Tyre Pressure Monitoring System

From TechWiki
Revision as of 21:30, 21 December 2012 by Thorburn (talk | contribs) (Created page with "==Evora== ===Disabling=== If a sensor for the TPMS fails or is removed the system will show a warning beep and a light to alert the driver. If the issue is known and not of ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Evora

Disabling

If a sensor for the TPMS fails or is removed the system will show a warning beep and a light to alert the driver. If the issue is known and not of concern to the driver then the system can be unplugged or disabled in software.

The TPMS module is behind the plastic latch panel in the boot.

Literally bellow the boot latch, Remove the Plastic panel, 2x10mm nuts and 3 fixings then remove the panel disconnecting the cig lighter wiring and two boot lights, remove rear boot carpet then disconnect the TPMS plug to the unit.[1]

Alternatively the system can be disabled using the Lotus Techcentre software.

References

  1. ↑ SELOC Forums » SELOC Chat » Evora TPMS problem
Retrieved from ‘https://wiki.seloc.org/index.php?title=Tyre_Pressure_Monitoring_System&oldid=10724’