File:8. Removing Lower Ball Joint Nut.JPG
Revision as of 08:50, 18 June 2006 by Andrew S (talk | contribs) (Step 7. Remove the ball joint nut . Use a 19mm ring/open ended spanner for the lower ball joint. You need to start with the ring end and transfer to the open end after winding the nut half the way up, otherwise the ring spanner will get stuck between the )
No higher resolution available.
8._Removing_Lower_Ball_Joint_Nut.JPG (600 × 450 pixels, file size: 44 KB, MIME type: image/jpeg)
Step 7. Remove the ball joint nut . Use a 19mm ring/open ended spanner for the lower ball joint. You need to start with the ring end and transfer to the open end after winding the nut half the way up, otherwise the ring spanner will get stuck between the nut and the hub carrier and you won’t be able to remove the nut or the spanner.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 08:50, 18 June 2006 | | 600 × 450 (44 KB) | Andrew S (talk | contribs) | Step 7. Remove the ball joint nut . Use a 19mm ring/open ended spanner for the lower ball joint. You need to start with the ring end and transfer to the open end after winding the nut half the way up, otherwise the ring spanner will get stuck between the |
You cannot overwrite this file.
File usage
The following 3 pages link to this file:
