File:15. Greasing New Ball Joint Rubber.JPG

From TechWiki
Revision as of 08:55, 18 June 2006 by Andrew S (talk | contribs) (Step 14. You may wish to put new ball joints in the freezer for a day or two. This ensures an easy fit into the wishbone. Grease the rubber dust cover so that it does not snag.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

15._Greasing_New_Ball_Joint_Rubber.JPG ‎(600 × 450 pixels, file size: 47 KB, MIME type: image/jpeg)

Step 14. You may wish to put new ball joints in the freezer for a day or two. This ensures an easy fit into the wishbone. Grease the rubber dust cover so that it does not snag.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current08:55, 18 June 2006Thumbnail for version as of 08:55, 18 June 2006600 × 450 (47 KB)Andrew S (talk | contribs)Step 14. You may wish to put new ball joints in the freezer for a day or two. This ensures an easy fit into the wishbone. Grease the rubber dust cover so that it does not snag.

You cannot overwrite this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from ‘https://wiki.seloc.org/index.php?title=File:15._Greasing_New_Ball_Joint_Rubber.JPG&oldid=1742’