File:16. Fitting New Ball Joint.JPG

No higher resolution available.

16._Fitting_New_Ball_Joint.JPG ‎(580 × 435 pixels, file size: 47 KB, MIME type: image/jpeg)

Step 15. Hand fit the new ball joint into the wishbone. It should go in easily if it is frozen as it will be slightly contracted.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	08:56, 18 June 2006		580 × 435 (47 KB)	Andrew S (talk \| contribs)	Step 15. Hand fit the new ball joint into the wishbone. It should go in easily if it is frozen as it will be slightly contracted.

You cannot overwrite this file.

The following 3 pages link to this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	SONY
Camera model	DSC-P92
Exposure time	1/8 sec (0.125)
F Number	f/2.8
ISO speed rating	160
Date and time of data generation	08:43, 16 June 2006
Lens focal length	8 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Nero PhotoSnap 1, 2, 0, 6
File change date and time	20:14, 16 June 2006
Exposure Programme	Normal programme
Exif version	2.2
Date and time of digitising	08:43, 16 June 2006
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Light source	Unknown
Flash	Flash fired, strobe return light detected, compulsory flash firing
Colour space	sRGB
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Scene capture type	Standard