File:18. Ball Joint Fitted.JPG

No higher resolution available.

18._Ball_Joint_Fitted.JPG ‎(600 × 450 pixels, file size: 46 KB, MIME type: image/jpeg)

Step 17. Tighten the bolts two turns at a time until the ball joint is seated. The heat created during fitting will defrost the ball joint.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	08:57, 18 June 2006		600 × 450 (46 KB)	Andrew S (talk \| contribs)	Step 17. Tighten the bolts two turns at a time until the ball joint is seated. The heat created during fitting will defrost the ball joint.

You cannot overwrite this file.

The following 3 pages link to this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	SONY
Camera model	DSC-P92
Exposure time	1/8 sec (0.125)
F Number	f/2.8
ISO speed rating	160
Date and time of data generation	08:48, 16 June 2006
Lens focal length	8 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Nero PhotoSnap 1, 2, 0, 6
File change date and time	20:06, 16 June 2006
Exposure Programme	Normal programme
Exif version	2.2
Date and time of digitising	08:48, 16 June 2006
APEX exposure bias	0
Maximum land aperture	3 APEX (f/2.83)
Metering mode	Pattern
Light source	Unknown
Flash	Flash fired, strobe return light detected, compulsory flash firing
Colour space	sRGB
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Scene capture type	Standard