File:30. Tighteneing Lower Ball Joint.JPG
Revision as of 09:05, 18 June 2006 by Andrew S (talk | contribs) (Step 28. With the suspension under compression tighten the lower ball joint nut to 45NM. If you only have a basic tool kit you will not be able to use a 19mm socket and torque wrench because the hub carrier will be in the way, so you will need to estimate)
No higher resolution available.
30._Tighteneing_Lower_Ball_Joint.JPG (580 × 435 pixels, file size: 46 KB, MIME type: image/jpeg)
Step 28. With the suspension under compression tighten the lower ball joint nut to 45NM. If you only have a basic tool kit you will not be able to use a 19mm socket and torque wrench because the hub carrier will be in the way, so you will need to estimate the right amount of tightness using a 19mm ring spanner.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 09:05, 18 June 2006 | | 580 × 435 (46 KB) | Andrew S (talk | contribs) | Step 28. With the suspension under compression tighten the lower ball joint nut to 45NM. If you only have a basic tool kit you will not be able to use a 19mm socket and torque wrench because the hub carrier will be in the way, so you will need to estimate |
You cannot overwrite this file.
File usage
The following 3 pages link to this file:
