File:29. Jacking Lower Wishbone To Ride Height.JPG
29._Jacking_Lower_Wishbone_To_Ride_Height.JPG (590 × 443 pixels, file size: 45 KB, MIME type: image/jpeg)
Step 27. Refit the damper assembly and grease the upper bushes. Do not tighten the upper or lower bolts at this stage. Lower the jack supporting the car to it’s minimum position and jack the suspension to the measurement at step 1. This is to ensure the damper is in it’s correct position to be torque tightened. It is important to do this so the damper bushes are in the correct position when the wheel is on the ground, otherwise the bushes will be twisted.
Torque the upper and lower damper bolts to 45 NM
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 12:03, 18 June 2006 | | 590 × 443 (45 KB) | Andrew S (talk | contribs) | Step 27. Refit the damper assembly and grease the upper bushes. Do not tighten the upper or lower bolts at this stage. Lower the jack supporting the car to it’s minimum position and jack the suspension to the measurement at step 1. This is to ensure the |
You cannot overwrite this file.
File usage
The following 2 pages link to this file:
