Difference between revisions of "Brake hoses"
m (added goodridge guide) |
|||
| Line 21: | Line 21: | ||
Will NOT fit USA spec | Will NOT fit USA spec | ||
| + | |||
| + | |||
| + | '''Taken from Goodridge''' | ||
| + | |||
| + | Click on Images to inlarge. | ||
| + | |||
| + | [[Image:howtohose.jpg|thumb|left|How to use guide below]] | ||
| + | {{clr}} | ||
| + | |||
| + | [[Image:goodridge.jpg|thumb|left|Lotus Goodridge Hoses]] | ||
| + | {{clr}} | ||
Revision as of 14:01, 20 March 2007
Brake hoses are used to transfer brake fluid to the brake caliper and force the brake pads onto the brake discs. They should not be confused with brake lining even though they are somethimes refered to as brake lines.
On an Elise the standard brake hoses are made from rubber which is fine up to a point, however these hoses tend to expand under the hydraulic pressure from the brake system, this results in the effort from your foot expanding the hose instead of stopping the car. Primarily this reduces brake feel.
Upgrading these (usually to stainless steel braided teflon hoses) results in a firmer, more positive brake pedal with less pedal travel. There are four brake hoses on the Elise and the procedure for changing them is relatively involved.
Aftermarket Products
Stainless Steal Goodridge Brake hose Kit
Lotus Part Number: A340J6000S
Will fit
Elise S1 and S2
Exige S1 and S2
340R
Will NOT fit USA spec
Taken from Goodridge
Click on Images to inlarge.
