Brake pads

The OEM Brake pads on the Elise are reasonably expensive and generally not highly regarded. There are many after market products to choose from with superior performance, both in terms of stopping power and longevity, and at a more reasonable costs.

Changing brake pads is an easy and rewarding DIY project, and some people prefer the reassurance this gives. There is a Brake pad bedding in procedure which you are encouraged to following after fitting new pads.

Brake pad fitment for the Elise is as follows:-

Below is a list of after market manufacturers with descriptions, and real world experiences, from SELOC members.

EBC

Greenstuff

A commonly used budget pad, OK for normal road use but don't cope to well when pushed.

Fine as a replacement for OEM

Ferodo

DS2500

Similar performance to Mintex 1144. Common replacement pad in mainland Europe

Mintex

1144

Excellent value for fast road and occasional track. Quick to bed in and work well from cold. Good pad life and not particularly abrasive on disks, although can be a bit dusty. Some fade experienced after pro-longed track use. Squeal can be a problem when the pads are hot, but a hefty dollop of coppaslip on the back of the pads should help.

Pagid

Official Website

Racing Compound Characteristics

RS 4-2 Blue

A medium friction racing compound with good cold friction and fading resistance up to 500°C ( 930°F).

• Work well from cold.
• Under very hard use they will fade before the RS14 compound.
• less prone to squeal than RS14's

Summary, A good compromise for both Road and Track usage.

Fronts are lasting around 10 hard track days (20 hours) rears are lasting 40 track hard days (80 hours).

RS 14 Black

This is a medium high friction value ceramic type compound with very good modulation, high fade resistance, low heat conductivity, and a good wear rate up to a temperature of 650°C (1.200°F).

• If used as a road pad they can eat discs, however when at track temperature the wear ratio will be higher in the pad providing less wear of the disk.
• Not as effective from cold as the RS 4-2 compound.
• Very track orientated pad so whilst safe to use on the road a driver with a road only intention may well be better to look at a different compound.

These pads can generate a lot of squeal if not used in anger on a regular basis, so while highly rated for track work, these pads are perhaps too compromised for a road car.

RS 15 Grey

Very high torque compound. It combines a 20% higher friction value than the RS14 with a slightly increased pad wear. Needs finesse to avoid over braking the car. Good release characteristic. Although the RS15 has a very good modulation (controllability) it might have an excessive bite for some applications, as lightweight cars or cars with boosted brakes. Applications: NASCAR, CART, F3, Touring cars, GT cars, WSC, DP, Trans Am and Rally.

SBS

ProTrack

http://www.sbs.dk/index_uk.html (Autosport menu => ProTrack)

OMP

Road&Sport

OT/7954 Rear pads

http://www.ompracing.it/prodotti.html?categorycode=GPASTIGLIE1&changelanguage=en

OMP Road&Sport brake pads have been developed to offer excellent performance in fast road use.

• Excellent stability of the friction coefficient, even at the highest temperature (see graph).
• This compound is the result of 30 years experience in rallies and track racers.
• For the new car models manufactured from 10/1999 the pads are homologated according to R-90 rules.

Racing

OT/6952 Rear pads

http://www.ompracing.it/prodotti.html?categorycode=GPASTIGLIE&changelanguage=en

971C RACING COMPOUND OMP 971C range of brake pads is made from a new friction material, asbestos free, having following characteristics:

• COMPOSITION: thermosetting resins with the addition of special carbon materials.
• FRICTION COEFFICIENT: very high (0.48).
• FRICTION STABILITY: uniform also during varying of the temperature in a field between 100 and 800° C (see graph).
• ANTI-FADING PROPERTIES: excellent
• MECHANICAL RESISTANCE: very high also thanks to the special structure formed by the substances present in the compound.
• TOP LEVEL PERFORMANCES in professional use (Rally, Group N).

Pads have good initial bite from cold and cope well with track use.

Could do with a little more feedback under hard braking, but don't show any signs of fading.

Like many track-oriented pads they can squeal/screech quite a bit on the street.

Low disc wear.

Carbone Lorraine

RC5, RC6, RC8

Sintered brake pads from French manufacturer who started out as a motorbike brake manufacturer, but also does the brake pads for the TGV and works rally teams from Peugeot, etc.

• RC5 pads have the lowest friction index (approx 0.48)
• RC6 is medium (0.55)
• RC8 is high (>0.6)

RC8 probably has a friction index that is too high for a light car like the Elise and locks up too quickly or gives too little control over brake modulation.

RC6 and RC5 are more useful.

Website

Click here for Elise specific pads

• Front pad type code: 4060
• Rear pad type code: 4115

As delivered the pads may be too thick and require some grinding of the friction material (about 1mm) to fit properly on new discs.

If used on older discs they usually fit directly.

These pads give a very consistent pedal feel and show little or no variation in retardation if temperatures go up. Fading because of pad material breakdown is virtually impossible as sintered material does not break down until >1100C and by that time your brake fluid will have started to boil.

Textar

R90 Road pads

Pure road pads which should be similar (and possibly identical) to Lotus OEM brake pads.

Part numbers:

• Front: 2032306 (EAN-number: 4019722256141)
• Rear: 2041003 (EAN-number: 4019722256172)