https://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&feed=atom&action=historyExige S2 soft top conversion - Revision history2024-03-29T01:05:21ZRevision history for this page on the wikiMediaWiki 1.35.0https://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=11372&oldid=prevZender at 21:41, 13 March 20142014-03-13T21:41:17Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 21:41, 13 March 2014</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2" >Line 2:</td>
<td colspan="2" class="diff-lineno">Line 2:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the weather seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the weather seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">[[Image:picturename.JPG|thumb|left|Click to enlarge]]</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">{{clr}}</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l10" >Line 10:</td>
<td colspan="2" class="diff-lineno">Line 7:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 6mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 6mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">[[Image:picturename.JPG|thumb|left|Click to enlarge]]</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">{{clr}}</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Check your measurements again.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Check your measurements again.</div></td></tr>
</table>Zenderhttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8762&oldid=preveliseman at 15:06, 3 May 20102010-05-03T15:06:50Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 15:06, 3 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l7" >Line 7:</td>
<td colspan="2" class="diff-lineno">Line 7:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with masking tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is <del class="diffchange diffchange-inline">228mm </del>give or take. Mark a line vertically down at <del class="diffchange diffchange-inline">228mm </del>in from each cant rail on the masking tape. Place the outer edge of the spacer against the marked line. Whilst holding the spacer against the marked line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre). Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame. The measurements are not critical as they tend to vary from car to car on the S2 Elise.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with masking tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is <ins class="diffchange diffchange-inline">230mm </ins>give or take. Mark a line vertically down at <ins class="diffchange diffchange-inline">230mm </ins>in from each cant rail on the masking tape. Place the outer edge of the spacer against the marked line. Whilst holding the spacer against the marked line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre). Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame. The measurements are not critical as they tend to vary from car to car on the S2 Elise.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit <del class="diffchange diffchange-inline">4mm </del>below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit <ins class="diffchange diffchange-inline">6mm </ins>below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:picturename.JPG|thumb|left|Click to enlarge]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Image:picturename.JPG|thumb|left|Click to enlarge]]</div></td></tr>
</table>elisemanhttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8755&oldid=prevMr Wiki: added picture boxs2010-05-03T08:47:20Z<p>added picture boxs</p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 08:47, 3 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l2" >Line 2:</td>
<td colspan="2" class="diff-lineno">Line 2:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the weather seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the weather seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Image:picturename.JPG|thumb|left|Click to enlarge]]</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">{{clr}}</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with masking tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm give or take. Mark a line vertically down at 228mm in from each cant rail on the masking tape. Place the outer edge of the spacer against the marked line. Whilst holding the spacer against the marked line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre). Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame. The measurements are not critical as they tend to vary from car to car on the S2 Elise.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with masking tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm give or take. Mark a line vertically down at 228mm in from each cant rail on the masking tape. Place the outer edge of the spacer against the marked line. Whilst holding the spacer against the marked line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre). Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame. The measurements are not critical as they tend to vary from car to car on the S2 Elise.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Image:picturename.JPG|thumb|left|Click to enlarge]]</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">{{clr}}</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Check your measurements again.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Check your measurements again.</div></td></tr>
</table>Mr Wikihttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8754&oldid=prevrobbieduncan: Add to Body category2010-05-03T08:43:37Z<p>Add to Body category</p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 08:43, 3 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l31" >Line 31:</td>
<td colspan="2" class="diff-lineno">Line 31:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Category:S2 Exige]]</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>[[Category:S2 Exige]]</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Category:Body]]</ins></div></td></tr>
</table>robbieduncanhttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8753&oldid=prevnixie at 08:36, 3 May 20102010-05-03T08:36:14Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 08:36, 3 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;"></del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l29" >Line 29:</td>
<td colspan="2" class="diff-lineno">Line 28:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>I will post some pictures in due course</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>I will post some pictures in due course</div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">[[Category:S2 Exige]]</ins></div></td></tr>
</table>nixiehttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8750&oldid=prevTaz at 08:32, 3 May 20102010-05-03T08:32:22Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 08:32, 3 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div><del style="font-weight: bold; text-decoration: none;">Pages relating to the Lotus Elise '''S2'''</del></div></td><td colspan="2"> </td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td></tr>
</table>Tazhttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8749&oldid=prevTaz at 08:30, 3 May 20102010-05-03T08:30:46Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 08:30, 3 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;">Pages relating to the Lotus Elise '''S2'''</ins></div></td></tr>
<tr><td colspan="2"> </td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div><ins style="font-weight: bold; text-decoration: none;"></ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
</table>Tazhttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8742&oldid=preveliseman at 20:04, 2 May 20102010-05-02T20:04:55Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 20:04, 2 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l1" >Line 1:</td>
<td colspan="2" class="diff-lineno">Line 1:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>You will need to purchase the escutcheons and spacers from Lotus.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the <ins class="diffchange diffchange-inline">weather </ins>seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm give or take. Mark a line vertically down at 228mm in from each cant rail on the masking tape. Place the outer edge of the spacer against the marked line. Whilst holding the spacer against the marked line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre). Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame.The measurements are not critical as they tend to vary <del class="diffchange diffchange-inline">in any event </del>from car to car on the S2 Elise.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with <ins class="diffchange diffchange-inline">masking </ins>tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm give or take. Mark a line vertically down at 228mm in from each cant rail on the masking tape. Place the outer edge of the spacer against the marked line. Whilst holding the spacer against the marked line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre). Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame. The measurements are not critical as they tend to vary from car to car on the S2 Elise.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l9" >Line 9:</td>
<td colspan="2" class="diff-lineno">Line 9:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Check your measurements again.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Check your measurements again.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Once you are satisfied that <del class="diffchange diffchange-inline">its </del>in the right position you have to drill your first hole. You are better off using a slow start cordless drill or a dremel. Start with small drill bits and carefully drill out the half moon. Keep in from the line.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Once you are satisfied that <ins class="diffchange diffchange-inline">the spacer is </ins>in the right position you have to drill your first hole. You are better off using a slow start cordless drill or a dremel. Start with small drill bits and carefully drill out the half moon. Keep in from the line.<ins class="diffchange diffchange-inline">You can always make the hole larger, you might struggle to make it smaller !</ins></div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>With a series of holes drilled use a slightly larger drill bit to open the holes out until the rough shape is achieved.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>With a series of holes drilled use a slightly larger drill bit to open the holes out until the rough shape is achieved.</div></td></tr>
<tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l15" >Line 15:</td>
<td colspan="2" class="diff-lineno">Line 15:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Work slowly and shape the hole until the escutcheon pushes in with a slight interference fit.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Work slowly and shape the hole until the escutcheon pushes in with a slight interference fit.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>Be extremely careful opening out the hole as there is a drainage channel immediatley behind where you are working. You don't want to breach that<del class="diffchange diffchange-inline">.</del>.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>Be extremely careful opening out the hole as there is a drainage channel immediatley behind where you are working. You don't want to breach that.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Its best also to open the hole with your dremmel parallel to the ground as the edges of the hole need to be slightly bevelled. Look at the escutcheon and its obvious why.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Its best also to open the hole with your dremmel parallel to the ground as the edges of the hole need to be slightly bevelled. Look at the escutcheon and its obvious why.</div></td></tr>
</table>elisemanhttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8741&oldid=preveliseman at 19:57, 2 May 20102010-05-02T19:57:57Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 19:57, 2 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3" >Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm give or take. Mark a line vertically down at 228mm in from each cant rail. Place the outer edge of the spacer against the <del class="diffchange diffchange-inline">markd </del>line. Whilst holding the spacer against the <del class="diffchange diffchange-inline">markd </del>line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre) <del class="diffchange diffchange-inline">iirc</del>. Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame.The measurements are not critical as they tend to vary in any event from car to car on the S2 Elise.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm give or take. Mark a line vertically down at 228mm in from each cant rail <ins class="diffchange diffchange-inline">on the masking tape</ins>. Place the outer edge of the spacer against the <ins class="diffchange diffchange-inline">marked </ins>line. Whilst holding the spacer against the <ins class="diffchange diffchange-inline">marked </ins>line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre). Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame.The measurements are not critical as they tend to vary in any event from car to car on the S2 Elise.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td></tr>
</table>elisemanhttps://wiki.seloc.org/index.php?title=Exige_S2_soft_top_conversion&diff=8740&oldid=preveliseman at 19:55, 2 May 20102010-05-02T19:55:56Z<p></p>
<table class="diff diff-contentalign-left diff-editfont-monospace" data-mw="interface">
<col class="diff-marker" />
<col class="diff-content" />
<col class="diff-marker" />
<col class="diff-content" />
<tr class="diff-title" lang="en-GB">
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">← Older revision</td>
<td colspan="2" style="background-color: #fff; color: #202122; text-align: center;">Revision as of 19:55, 2 May 2010</td>
</tr><tr><td colspan="2" class="diff-lineno" id="mw-diff-left-l3" >Line 3:</td>
<td colspan="2" class="diff-lineno">Line 3:</td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>To start you will need to protect the roll bar with masking tape. Using the two inverted semi circle escutcheons on the windscreen frame as a guide place masking tape on the roll bar cover in the corresponding positions. Cover the roll bar cover from the seal right down to the lower edge. This is more than you need but it gives you some room to write down some measurements. Make sure that you tuck the tape in under the lip of the rubber seal as you need to know precisely where the seal sits in relation to the actual roll bar.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'>−</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #ffe49c; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm <del class="diffchange diffchange-inline">iirc</del>. Mark a line vertically down at 228mm in from each cant rail. Place the outer edge of the spacer against the markd line. Whilst holding the spacer against the markd line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre) iirc. Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame.</div></td><td class='diff-marker'>+</td><td style="color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #a3d3ff; vertical-align: top; white-space: pre-wrap;"><div>With the roll bar protected with tape measure in from the inner most top corner of each cant rail locating bracket. The measurement is 228mm <ins class="diffchange diffchange-inline">give or take</ins>. Mark a line vertically down at 228mm in from each cant rail. Place the outer edge of the spacer against the markd line. Whilst holding the spacer against the markd line mark the inner edge of the spacers. The spacers should be, give or take, 400mm apart (centre to centre) iirc. Each spacer should be roughly in line with the front roof rail sockets on the windscreen frame<ins class="diffchange diffchange-inline">.The measurements are not critical as they tend to vary in any event from car to car on the S2 Elise</ins>.</div></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"></td></tr>
<tr><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td><td class='diff-marker'> </td><td style="background-color: #f8f9fa; color: #202122; font-size: 88%; border-style: solid; border-width: 1px 1px 1px 4px; border-radius: 0.33em; border-color: #eaecf0; vertical-align: top; white-space: pre-wrap;"><div>Once you have checked, rechecked and checked again mark the top edge of the spacer. It should sit 4mm below the edge of the rubber seal on the roll bar cover. Once you are satisfied with its position mark the "half moon" inner shape of the spacer on the masking tape. Dont forget it has to be inverted.</div></td></tr>
</table>eliseman