Difference between revisions of "File:15. Greasing New Ball Joint Rubber.JPG"

From TechWiki
Jump to navigation Jump to search
(Step 14. You may wish to put new ball joints in the freezer for a day or two. This ensures an easy fit into the wishbone. Grease the rubber dust cover so that it does not snag.)
 
(No difference)

Latest revision as of 09:55, 18 June 2006

Step 14. You may wish to put new ball joints in the freezer for a day or two. This ensures an easy fit into the wishbone. Grease the rubber dust cover so that it does not snag.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current09:55, 18 June 2006Thumbnail for version as of 09:55, 18 June 2006600 × 450 (47 KB)Andrew S (talk | contribs)Step 14. You may wish to put new ball joints in the freezer for a day or two. This ensures an easy fit into the wishbone. Grease the rubber dust cover so that it does not snag.

You cannot overwrite this file.

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from ‘https://wiki.seloc.org/index.php?title=File:15._Greasing_New_Ball_Joint_Rubber.JPG&oldid=1742’