File:27. Spring Fitted To New Damper.JPG

From TechWiki
Revision as of 10:03, 18 June 2006 by Andrew S (talk | contribs) (Step 26. Here is the spring fitted to the damper. Take care to ensure the end of the bottom part of the spring is 180 degrees away from the slot in the bottom spring plate.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

27._Spring_Fitted_To_New_Damper.JPG ‎(580 × 435 pixels, file size: 45 KB, MIME type: image/jpeg)

Step 26. Here is the spring fitted to the damper. Take care to ensure the end of the bottom part of the spring is 180 degrees away from the slot in the bottom spring plate.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current10:03, 18 June 2006Thumbnail for version as of 10:03, 18 June 2006580 × 435 (45 KB)Andrew S (talk | contribs)Step 26. Here is the spring fitted to the damper. Take care to ensure the end of the bottom part of the spring is 180 degrees away from the slot in the bottom spring plate.

You cannot overwrite this file.

The following 2 pages link to this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitise it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from ‘https://wiki.seloc.org/index.php?title=File:27._Spring_Fitted_To_New_Damper.JPG&oldid=1754’